onsemi (Ansemi)
圖片可能僅供參考。
有關產品詳細信息,請參閱規格。
FXL6408UMX
Fully Configurable 8-Bit I2C Controlled GPIO Expander
類別
Communication interface chip/UART/485/232 > I/O expander
描述
The FXL6408 is an 8-bit I2C controlled GPIO expander. When configured in input mode, the FXL6408 monitors the input port for data transitions and signals the baseband by asserting the /INT pin. Input defaults are individually programmable for custom input detection. All inputs can be configured as pre-biased inputs using pull-up or pull-down resistors in open-drain or non-driving applications. When configured in output mode, the GPIO pins can provide a 6 mA output drive according to the I2C register settings. The FXL6408 design allows conversion from as low as 1.65 V up to 4.0 V. The FXL6408 features an active-low reset input with power-on-reset (POR) circuitry and I2C software reset options.
請求報價
請填寫所有必填字段,然後點擊
提交,我們將在12小時內透過電子郵件與您聯繫。如果您有任何問題,請留言或發送電子郵件至
[email protected],我們會盡快回覆。
有存貨 76288 PCS