Winbond Electronics
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
W25Q80BLSVIG
詳情 數據表

W25Q80BLSVIG

Product Overview

Category

The W25Q80BLSVIG belongs to the category of Serial Flash Memory.

Use

It is primarily used for storing and retrieving digital information in electronic devices.

Characteristics

  • Non-volatile memory
  • High-speed data transfer
  • Low power consumption
  • Compact size
  • Wide operating voltage range

Package

The W25Q80BLSVIG is available in a small form factor package, making it suitable for space-constrained applications.

Essence

This product is essential for storing firmware, boot code, and other critical data in various electronic devices.

Packaging/Quantity

The W25Q80BLSVIG is typically sold in reels or trays, with varying quantities depending on the manufacturer's specifications.

Specifications

  • Memory Capacity: 8 Megabits (1 Megabyte)
  • Interface: Serial Peripheral Interface (SPI)
  • Operating Voltage Range: 2.7V - 3.6V
  • Operating Temperature Range: -40°C to +85°C
  • Data Transfer Rate: Up to 104 MHz
  • Erase/Program Time: Less than 4ms (Sector), Less than 200ms (Chip)

Detailed Pin Configuration

The W25Q80BLSVIG has a standard pin configuration as follows:

  1. Chip Select (/CS)
  2. Serial Clock (SCLK)
  3. Serial Data Input (SI)
  4. Serial Data Output (SO)
  5. Write Protect (/WP)
  6. Hold (/HOLD)
  7. Ground (GND)
  8. Power Supply (VCC)

Functional Features

  • Sector Erase and Program Operations
  • Block Erase and Program Operations
  • Chip Erase Operation
  • Dual and Quad SPI Modes for faster data transfer
  • Software and Hardware Write Protection
  • Deep Power-down Mode for low power consumption

Advantages and Disadvantages

Advantages

  • High-speed data transfer rate
  • Low power consumption
  • Compact size
  • Wide operating voltage range
  • Versatile erase and program operations

Disadvantages

  • Limited storage capacity (8 Megabits)
  • Relatively slower erase/program time compared to larger memory chips

Working Principles

The W25Q80BLSVIG utilizes the Serial Peripheral Interface (SPI) to communicate with the host device. It stores data in non-volatile memory cells, which retain information even when power is disconnected. The SPI interface allows for fast and efficient data transfer between the chip and the host device.

Detailed Application Field Plans

The W25Q80BLSVIG is widely used in various electronic devices, including but not limited to: - Consumer electronics (smartphones, tablets, digital cameras) - Automotive systems (infotainment, navigation) - Industrial equipment (data loggers, control systems) - Networking devices (routers, switches) - Medical devices (patient monitoring, diagnostic equipment)

Detailed and Complete Alternative Models

  1. W25Q16BLSVIG: 16 Megabit Serial Flash Memory
  2. W25Q32BLSVIG: 32 Megabit Serial Flash Memory
  3. W25Q64BLSVIG: 64 Megabit Serial Flash Memory
  4. W25Q128BLSVIG: 128 Megabit Serial Flash Memory

These alternative models offer higher storage capacities while maintaining similar characteristics and functionality to the W25Q80BLSVIG.

In conclusion, the W25Q80BLSVIG is a compact and versatile Serial Flash Memory chip that provides high-speed data transfer, low power consumption, and reliable storage capabilities. Its wide range of applications makes it an essential component in various electronic devices.

10個與W25Q80BLSVIG在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of W25Q80BLSVIG in technical solutions:

  1. Question: What is the W25Q80BLSVIG?
    Answer: The W25Q80BLSVIG is a serial flash memory chip manufactured by Winbond. It has a capacity of 8 megabits (1 megabyte) and operates on a Serial Peripheral Interface (SPI).

  2. Question: What are some common applications of the W25Q80BLSVIG?
    Answer: The W25Q80BLSVIG is commonly used in various electronic devices, such as consumer electronics, industrial equipment, automotive systems, and networking devices.

  3. Question: What is the voltage range supported by the W25Q80BLSVIG?
    Answer: The W25Q80BLSVIG supports a voltage range of 2.7V to 3.6V, making it compatible with a wide range of systems.

  4. Question: How fast is the data transfer rate of the W25Q80BLSVIG?
    Answer: The W25Q80BLSVIG has a maximum clock frequency of 104 MHz, allowing for high-speed data transfers.

  5. Question: Can the W25Q80BLSVIG be easily integrated into existing designs?
    Answer: Yes, the W25Q80BLSVIG is designed to be pin-compatible with other popular flash memory chips, making it easy to replace or upgrade existing designs.

  6. Question: Does the W25Q80BLSVIG support hardware and software write protection?
    Answer: Yes, the W25Q80BLSVIG provides both hardware and software write protection features to prevent accidental or unauthorized modifications to the stored data.

  7. Question: What is the typical lifespan of the W25Q80BLSVIG?
    Answer: The W25Q80BLSVIG has a minimum endurance of 100,000 program/erase cycles, ensuring reliable performance over an extended period.

  8. Question: Can the W25Q80BLSVIG operate in extreme temperature conditions?
    Answer: Yes, the W25Q80BLSVIG is designed to operate in a wide temperature range, typically from -40°C to +85°C, making it suitable for various environments.

  9. Question: Does the W25Q80BLSVIG support software and hardware reset functions?
    Answer: Yes, the W25Q80BLSVIG provides both software and hardware reset functions, allowing for easy system initialization and recovery.

  10. Question: Is the W25Q80BLSVIG compatible with popular microcontrollers and microprocessors?
    Answer: Yes, the W25Q80BLSVIG is compatible with a wide range of microcontrollers and microprocessors that support SPI communication, making it versatile for different system designs.

Please note that these answers are general and may vary depending on specific implementation details and requirements.