Vishay Siliconix
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
DG413LDQ-E3
詳情 數據表

DG413LDQ-E3

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Switching and Multiplexing
  • Characteristics: High-performance, low-voltage, quad analog switch
  • Package: 16-pin SOIC (Small Outline Integrated Circuit)
  • Essence: The DG413LDQ-E3 is a versatile analog switch designed for various applications requiring signal routing and switching capabilities.
  • Packaging/Quantity: Available in tape and reel packaging with 2500 units per reel.

Specifications

  • Number of Switches: 4
  • Switch Type: Single Pole, Single Throw (SPST)
  • Voltage Supply Range: ±2.7V to ±15V
  • On-Resistance: 35Ω (typical)
  • Off-Leakage Current: 1nA (typical)
  • Operating Temperature Range: -40°C to +85°C
  • Control Logic: CMOS/TTL compatible

Detailed Pin Configuration

The DG413LDQ-E3 features a 16-pin SOIC package with the following pin configuration:

  1. IN1: Input terminal for switch 1
  2. OUT1: Output terminal for switch 1
  3. V-: Negative voltage supply
  4. IN2: Input terminal for switch 2
  5. OUT2: Output terminal for switch 2
  6. GND: Ground
  7. IN3: Input terminal for switch 3
  8. OUT3: Output terminal for switch 3
  9. V+: Positive voltage supply
  10. IN4: Input terminal for switch 4
  11. OUT4: Output terminal for switch 4
  12. NC: No connection
  13. EN: Enable control input
  14. COM: Common terminal for all switches
  15. V-: Negative voltage supply
  16. V+: Positive voltage supply

Functional Features

  • High-performance analog switches for signal routing and switching applications
  • Low on-resistance and off-leakage current ensure minimal signal distortion
  • Wide voltage supply range allows compatibility with various systems
  • CMOS/TTL compatible control logic simplifies integration with digital circuits
  • Fast switching speed enables real-time signal processing

Advantages and Disadvantages

Advantages: - High-performance analog switches for accurate signal routing - Low on-resistance minimizes signal distortion - Wide voltage supply range enhances compatibility - CMOS/TTL compatible control logic simplifies integration

Disadvantages: - Limited number of switches (4 in total) - Not suitable for high-power applications

Working Principles

The DG413LDQ-E3 operates based on the principles of solid-state switching. When the control input (EN) is activated, the corresponding switch connects the input terminal to the output terminal, allowing the signal to pass through. Conversely, when the control input is deactivated, the switch disconnects the input and output terminals, isolating the signal.

Detailed Application Field Plans

The DG413LDQ-E3 finds applications in various fields, including:

  1. Audio and Video Signal Routing: Enables seamless switching between different audio/video sources.
  2. Test and Measurement Equipment: Facilitates signal routing and multiplexing in test setups.
  3. Communication Systems: Used for signal switching and routing in telecommunication devices.
  4. Industrial Automation: Allows for flexible signal routing in control systems.
  5. Medical Devices: Enables signal switching and routing in medical equipment.

Detailed and Complete Alternative Models

  1. DG411LDQ-E3: Similar quad analog switch with lower on-resistance.
  2. DG412LDQ-E3: Quad analog switch with higher voltage supply range.
  3. DG414LDQ-E3: Quad analog switch with additional features like latch-up protection.

(Note: This entry has a total word count of 431 words)

10個與DG413LDQ-E3在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of DG413LDQ-E3 in technical solutions:

  1. Question: What is DG413LDQ-E3?
    Answer: DG413LDQ-E3 is a specific model of analog switch IC (integrated circuit) used for routing signals in electronic circuits.

  2. Question: What is the purpose of using DG413LDQ-E3 in technical solutions?
    Answer: DG413LDQ-E3 is commonly used to switch or route analog signals between different components or subsystems in electronic systems.

  3. Question: What are the key features of DG413LDQ-E3?
    Answer: Some key features of DG413LDQ-E3 include low on-resistance, low leakage current, wide operating voltage range, and compatibility with various signal types.

  4. Question: In which applications can DG413LDQ-E3 be used?
    Answer: DG413LDQ-E3 can be used in a wide range of applications such as audio/video systems, communication systems, test and measurement equipment, and industrial control systems.

  5. Question: How many channels does DG413LDQ-E3 have?
    Answer: DG413LDQ-E3 has four independent channels, allowing it to switch or route multiple signals simultaneously.

  6. Question: What is the maximum voltage rating of DG413LDQ-E3?
    Answer: The maximum voltage rating of DG413LDQ-E3 is typically around 30 volts, but it may vary depending on the specific model and manufacturer.

  7. Question: Can DG413LDQ-E3 handle both AC and DC signals?
    Answer: Yes, DG413LDQ-E3 is designed to handle both AC and DC signals, making it suitable for a wide range of applications.

  8. Question: Is DG413LDQ-E3 compatible with digital signals?
    Answer: While DG413LDQ-E3 is primarily designed for analog signals, it can also handle low-frequency digital signals effectively.

  9. Question: What is the typical power consumption of DG413LDQ-E3?
    Answer: DG413LDQ-E3 has low power consumption, typically in the range of a few milliwatts, making it suitable for battery-powered applications.

  10. Question: Can DG413LDQ-E3 be used in high-speed switching applications?
    Answer: DG413LDQ-E3 is not specifically designed for high-speed switching applications. It is more commonly used in low to moderate speed signal routing scenarios.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of DG413LDQ-E3.