圖片可能僅供參考。
有關產品詳細信息,請參閱規格。
TSOP58540

TSOP58540

Product Overview

TSOP58540 belongs to the category of Infrared Receiver Modules. These modules are used for remote control systems in various electronic devices. The TSOP58540 is known for its high sensitivity, low power consumption, and immunity to ambient light. It comes in a compact package and is widely used in consumer electronics for remote control applications.

Basic Information

  • Category: Infrared Receiver Module
  • Use: Remote control systems in electronic devices
  • Characteristics: High sensitivity, low power consumption, immunity to ambient light
  • Package: Compact
  • Essence: Reliable remote control functionality
  • Packaging/Quantity: Varies based on manufacturer

Specifications

The TSOP58540 operates at a carrier frequency of 38 kHz and has a supply voltage ranging from 2.5V to 5.5V. It consumes very low power, typically around 350 µA, making it suitable for battery-operated devices. The module has a reception range of approximately 45 meters and operates over a wide temperature range.

Detailed Pin Configuration

The TSOP58540 typically consists of three pins: GND (ground), VCC (power supply), and OUT (output). The pinout configuration is as follows: - Pin 1: GND - Pin 2: VCC - Pin 3: OUT

Functional Features

The TSOP58540 is designed to receive infrared signals from remote controls and convert them into electrical signals. It filters out disturbances from sunlight and other sources of infrared radiation, ensuring reliable operation in various lighting conditions. The module demodulates the received signals and provides a clean output for further processing by the device's microcontroller.

Advantages and Disadvantages

Advantages

  • High sensitivity
  • Low power consumption
  • Immunity to ambient light
  • Wide operating temperature range
  • Long reception range

Disadvantages

  • Limited to specific carrier frequencies
  • Requires line-of-sight communication with the remote control

Working Principles

When an infrared signal is emitted by a remote control, the TSOP58540 receives and amplifies the signal. It then uses a bandpass filter to isolate the 38 kHz carrier frequency commonly used in remote control systems. The demodulated signal is then made available at the output pin for further processing by the connected circuitry.

Detailed Application Field Plans

The TSOP58540 finds extensive use in various consumer electronics, including televisions, audio systems, air conditioners, and other appliances with remote control capabilities. It is also employed in industrial automation for remote monitoring and control applications.

Detailed and Complete Alternative Models

Several alternative models to the TSOP58540 exist in the market, offering similar functionality with slight variations in specifications. Some notable alternatives include the TSOP38238, TSOP4838, and TSOP31238, each catering to specific application requirements and operating parameters.

In conclusion, the TSOP58540 is a reliable and efficient infrared receiver module that plays a crucial role in enabling remote control functionality in a wide range of electronic devices. Its high sensitivity, low power consumption, and immunity to ambient light make it a popular choice for manufacturers seeking robust remote control solutions.

[Word Count: 491]

10個與TSOP58540在技術方案中應用相關的常見問題與解答

  1. What is TSOP58540?

    • TSOP58540 is a miniaturized IR receiver module for infrared remote control systems.
  2. What is the operating voltage range of TSOP58540?

    • The operating voltage range of TSOP58540 is typically 2.5V to 5.5V.
  3. What is the typical reception range of TSOP58540?

    • The typical reception range of TSOP58540 is around 45 meters.
  4. What is the carrier frequency of TSOP58540?

    • The carrier frequency of TSOP58540 is typically 38kHz.
  5. What are the typical applications of TSOP58540?

    • TSOP58540 is commonly used in TVs, air conditioners, set-top boxes, and other home appliances with infrared remote control functionality.
  6. What is the output signal format of TSOP58540?

    • The output signal format of TSOP58540 is active low.
  7. How does TSOP58540 handle interference from ambient light?

    • TSOP58540 has built-in automatic gain control to suppress disturbances caused by daylight or fluorescent lamps.
  8. Can TSOP58540 be used in battery-powered devices?

    • Yes, TSOP58540's low power consumption makes it suitable for use in battery-powered devices.
  9. What is the typical supply current of TSOP58540?

    • The typical supply current of TSOP58540 is around 350µA.
  10. Is TSOP58540 compatible with standard microcontrollers?

    • Yes, TSOP58540 can be easily interfaced with standard microcontrollers using its output pin.

These questions and answers cover various aspects of TSOP58540's technical specifications and applications. If you need more specific information, feel free to ask!