Vishay Semiconductor Diodes Division
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
SS10PH45HM3/86A
詳情 數據表

SS10PH45HM3/86A

Product Overview

Category

SS10PH45HM3/86A belongs to the category of semiconductor devices.

Use

It is used as a high-power Schottky rectifier for various electronic applications.

Characteristics

  • High power handling capability
  • Low forward voltage drop
  • Fast switching speed
  • High thermal efficiency

Package

The SS10PH45HM3/86A is typically available in a TO-277A (SMPC) package.

Essence

The essence of this product lies in its ability to efficiently convert alternating current (AC) to direct current (DC) with minimal power loss.

Packaging/Quantity

It is commonly packaged in reels and available in varying quantities depending on the manufacturer's specifications.

Specifications

  • Maximum Average Forward Current: 10A
  • Maximum Peak Forward Surge Current: 150A
  • Maximum Reverse Voltage: 45V
  • Operating Temperature Range: -65°C to +175°C
  • Forward Voltage Drop: 0.55V at 5A

Detailed Pin Configuration

The SS10PH45HM3/86A typically has three pins: 1. Anode 2. Cathode 3. Heatsink or thermal pad connection (if applicable)

Functional Features

  • High current carrying capability
  • Low power dissipation
  • Fast recovery time
  • Excellent thermal management

Advantages

  • Efficient power conversion
  • Reduced heat generation
  • Compact design
  • Suitable for high-frequency applications

Disadvantages

  • Sensitive to voltage spikes
  • Higher cost compared to standard rectifiers
  • Requires careful thermal management in high-power applications

Working Principles

The SS10PH45HM3/86A operates based on the principles of Schottky barrier rectification, where the metal-semiconductor junction allows for fast electron flow with minimal voltage drop.

Detailed Application Field Plans

This product is widely used in: - Switching power supplies - DC-DC converters - Solar inverters - Motor drive circuits - Power factor correction circuits

Detailed and Complete Alternative Models

Some alternative models to SS10PH45HM3/86A include: - SS12PH45HM3/86A - SS15PH45HM3/86A - SS20PH45HM3/86A - SS30PH45HM3/86A

In conclusion, the SS10PH45HM3/86A is a high-power Schottky rectifier with excellent characteristics suitable for various electronic applications, especially those requiring efficient power conversion and high thermal performance.

[Word count: 346]

10個與SS10PH45HM3/86A在技術方案中應用相關的常見問題與解答

  1. What is SS10PH45HM3/86A?

    • SS10PH45HM3/86A is a high-power, high-frequency semiconductor device commonly used in technical solutions such as power amplifiers and RF applications.

  2. What are the key specifications of SS10PH45HM3/86A?

    • The key specifications of SS10PH45HM3/86A include its power handling capability, frequency range, gain, and input/output impedance.

  3. How is SS10PH45HM3/86A typically used in power amplifier designs?

    • SS10PH45HM3/86A is often used as the main amplifying element in power amplifier designs due to its high-power handling capabilities and efficiency.

  4. What are the typical applications of SS10PH45HM3/86A in RF systems?

    • SS10PH45HM3/86A is commonly used in RF systems for applications such as signal amplification, frequency conversion, and transmission/reception of high-frequency signals.

  5. What are the recommended operating conditions for SS10PH45HM3/86A?

    • The recommended operating conditions for SS10PH45HM3/86A typically include specific voltage, current, and temperature ranges to ensure optimal performance and reliability.

  6. How does SS10PH45HM3/86A compare to other similar semiconductor devices in terms of performance?

    • SS10PH45HM3/86A is known for its high power handling, low distortion, and wide frequency range, making it a preferred choice for many technical solutions.

  7. Are there any specific design considerations when using SS10PH45HM3/86A in technical solutions?

    • Design considerations for SS10PH45HM3/86A may include thermal management, matching network design, and proper biasing to maximize its performance and longevity.

  8. What are the typical challenges associated with integrating SS10PH45HM3/86A into technical solutions?

    • Challenges may include managing heat dissipation, ensuring proper RF layout and grounding, and addressing potential stability issues in the amplifier circuit.

  9. Can SS10PH45HM3/86A be used in high-reliability applications such as aerospace or defense systems?

    • Yes, SS10PH45HM3/86A is often used in high-reliability applications due to its robust construction and proven performance in demanding environments.

  10. Where can I find detailed application notes and reference designs for incorporating SS10PH45HM3/86A into my technical solution?

    • Detailed application notes and reference designs for SS10PH45HM3/86A can typically be found on the manufacturer's website or through authorized distributors, providing valuable guidance for successful integration.