Vishay BC Components
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
NTCLE213E3103HHB0
詳情 數據表

NTCLE213E3103HHB0

Introduction

NTCLE213E3103HHB0 is a temperature sensor belonging to the category of NTC thermistors. This device is commonly used for temperature sensing and control applications due to its unique characteristics. It comes in a small package and offers high accuracy, making it suitable for various electronic systems.

Basic Information Overview

  • Category: NTC Thermistor
  • Use: Temperature sensing and control
  • Characteristics: High accuracy, small package size
  • Package: SMD (Surface Mount Device)
  • Essence: Precise temperature measurement
  • Packaging/Quantity: Typically available in reels of 1000 units

Specifications

  • Resistance at 25°C: 10 kΩ
  • Tolerance: ±1%
  • Operating Temperature Range: -40°C to 125°C
  • Thermal Time Constant: 5 seconds

Detailed Pin Configuration

The NTCLE213E3103HHB0 has two pins, typically labeled as "VCC" and "GND". The VCC pin is connected to the positive supply voltage, while the GND pin is connected to the ground.

Functional Features

  • High accuracy temperature sensing
  • Fast response time
  • Small form factor
  • Wide operating temperature range

Advantages and Disadvantages

Advantages

  • High accuracy
  • Compact size
  • Suitable for various applications

Disadvantages

  • Limited temperature range compared to some other sensors
  • Requires calibration for specific applications

Working Principles

NTCLE213E3103HHB0 operates based on the principle of negative temperature coefficient (NTC) thermistors. As the temperature changes, the resistance of the thermistor changes inversely. This property is utilized to measure the temperature in electronic systems.

Detailed Application Field Plans

This temperature sensor can be used in various applications such as: - HVAC systems - Automotive climate control - Industrial temperature monitoring - Consumer electronics

Detailed and Complete Alternative Models

Some alternative models to NTCLE213E3103HHB0 include: - NTCLE100E3103JB0 - NTCLE100E3103JB0 - NTCLE100E3103JB0

In conclusion, NTCLE213E3103HHB0 is a versatile temperature sensor with high accuracy and fast response time, making it suitable for a wide range of temperature sensing and control applications.

[Word count: 324]

10個與NTCLE213E3103HHB0在技術方案中應用相關的常見問題與解答

  1. What is the NTCLE213E3103HHB0 temperature sensor used for?

    • The NTCLE213E3103HHB0 is a temperature sensor commonly used for measuring and monitoring temperature in various technical solutions.

  2. What is the operating temperature range of NTCLE213E3103HHB0?

    • The operating temperature range of NTCLE213E3103HHB0 is typically -40°C to 125°C, making it suitable for a wide range of applications.

  3. How accurate is the NTCLE213E3103HHB0 temperature sensor?

    • The accuracy of the NTCLE213E3103HHB0 temperature sensor can vary, but it is generally considered to be highly accurate when properly calibrated and used within its specified operating conditions.

  4. What are the typical applications of NTCLE213E3103HHB0 in technical solutions?

    • The NTCLE213E3103HHB0 is commonly used in applications such as HVAC systems, automotive electronics, industrial equipment, and consumer electronics for temperature sensing and control.

  5. How does the NTCLE213E3103HHB0 sensor interface with microcontrollers or other electronic devices?

    • The NTCLE213E3103HHB0 sensor can be interfaced with microcontrollers or other electronic devices using analog voltage output or digital communication protocols such as I2C or SPI.

  6. What are the key specifications of the NTCLE213E3103HHB0 temperature sensor?

    • The key specifications of the NTCLE213E3103HHB0 include its resistance at room temperature, beta value, thermal time constant, and maximum power rating.

  7. Can the NTCLE213E3103HHB0 sensor be used in harsh environments?

    • The NTCLE213E3103HHB0 sensor can be used in some harsh environments, but it is important to consider factors such as moisture, chemical exposure, and mechanical stress when designing the application.

  8. Is calibration required for the NTCLE213E3103HHB0 sensor?

    • Calibration may be required for the NTCLE213E3103HHB0 sensor to ensure accurate temperature measurements, especially if high precision is necessary for the application.

  9. What are the typical power requirements for the NTCLE213E3103HHB0 sensor?

    • The NTCLE213E3103HHB0 sensor typically has low power requirements, making it suitable for battery-powered or energy-efficient applications.

  10. Are there any known limitations or considerations when using the NTCLE213E3103HHB0 sensor in technical solutions?

    • Some considerations when using the NTCLE213E3103HHB0 sensor include self-heating effects, response time, and the need for temperature compensation in certain applications.