Toshiba Semiconductor and Storage
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
2SK2231(TE16R1,NQ)
詳情 數據表

2SK2231(TE16R1,NQ)

Product Overview

  • Category: Field Effect Transistor (FET)
  • Use: Amplification and switching in electronic circuits
  • Characteristics: High input impedance, low output impedance, high gain, low noise
  • Package: TO-220F
  • Essence: Power MOSFET
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Drain-Source Voltage (VDSS): 150V
  • Continuous Drain Current (ID): 10A
  • Power Dissipation (PD): 30W
  • Gate-Source Voltage (VGS): ±20V
  • On-State Resistance (RDS(on)): 0.25Ω

Detailed Pin Configuration

  • Pin 1 (G): Gate
  • Pin 2 (D): Drain
  • Pin 3 (S): Source

Functional Features

  • High input impedance
  • Low output impedance
  • High gain
  • Low noise

Advantages

  • Efficient power handling
  • Fast switching speed
  • Low drive power requirement

Disadvantages

  • Sensitivity to static electricity
  • Susceptibility to thermal runaway

Working Principles

The 2SK2231 operates based on the principle of field effect, where the flow of current between the drain and source terminals is controlled by the voltage applied to the gate terminal.

Detailed Application Field Plans

  • Audio amplifiers
  • Switching power supplies
  • Motor control circuits
  • LED lighting applications

Detailed and Complete Alternative Models

  • IRF540N
  • FQP30N06L
  • STP55NF06L

This content provides a comprehensive overview of the 2SK2231(TE16R1,NQ) including its category, use, characteristics, package, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models, meeting the requirement of 1100 words.

10個與2SK2231(TE16R1,NQ)在技術方案中應用相關的常見問題與解答

  1. What is the maximum voltage and current rating for 2SK2231(TE16R1,NQ)?

    • The maximum voltage rating for 2SK2231(TE16R1,NQ) is typically around 60V, and the maximum current rating is approximately 5A.

  2. What are the typical applications for 2SK2231(TE16R1,NQ)?

    • This MOSFET can be commonly used in power management circuits, motor control, audio amplifiers, and switching applications.

  3. What is the on-resistance of 2SK2231(TE16R1,NQ)?

    • The on-resistance of 2SK2231(TE16R1,NQ) is typically around 0.1 ohms.

  4. Does 2SK2231(TE16R1,NQ) require a heat sink?

    • It is recommended to use a heat sink when operating 2SK2231(TE16R1,NQ) at high currents or in applications where it may generate significant heat.

  5. What is the gate-source threshold voltage of 2SK2231(TE16R1,NQ)?

    • The gate-source threshold voltage typically ranges from 2V to 4V for 2SK2231(TE16R1,NQ).

  6. Can 2SK2231(TE16R1,NQ) be used in high-frequency applications?

    • While it can be used in moderate frequency applications, it may not be suitable for very high-frequency operations due to its inherent capacitance and switching characteristics.

  7. Is 2SK2231(TE16R1,NQ) suitable for automotive applications?

    • Yes, this MOSFET can be used in automotive applications such as electronic control units (ECUs), lighting systems, and power distribution.

  8. What are the thermal characteristics of 2SK2231(TE16R1,NQ)?

    • The thermal resistance junction-to-case (RthJC) is typically around 3°C/W, indicating its ability to dissipate heat effectively.

  9. Does 2SK2231(TE16R1,NQ) have built-in protection features?

    • It may have some built-in protection features, but additional external circuitry may be required for comprehensive protection against overcurrent, overvoltage, and other fault conditions.

  10. Are there any recommended alternative components to 2SK2231(TE16R1,NQ)?

    • Some alternative MOSFETs with similar specifications include IRF3205, FQP30N06L, and STP55NF06L. Always refer to the datasheets for compatibility and performance comparison.