XC61HC1812MR-G
Product Overview
Category
XC61HC1812MR-G belongs to the category of electronic components.
Use
It is commonly used in various electronic devices and circuits for voltage regulation and power management purposes.
Characteristics
- Small form factor
- High precision
- Low power consumption
- Wide operating temperature range
- Excellent stability and reliability
Package
XC61HC1812MR-G is available in a surface mount package.
Essence
The essence of XC61HC1812MR-G lies in its ability to provide accurate and stable voltage regulation, ensuring proper functioning of electronic systems.
Packaging/Quantity
XC61HC1812MR-G is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.
Specifications
- Input Voltage Range: 2.5V - 6.0V
- Output Voltage Range: 1.2V - 5.0V
- Output Current: 100mA
- Dropout Voltage: 200mV (typical)
- Line Regulation: ±0.05% (typical)
- Load Regulation: ±0.1% (typical)
- Quiescent Current: 30µA (typical)
- Operating Temperature Range: -40°C to +85°C
Detailed Pin Configuration
XC61HC1812MR-G has three pins:
- VIN (Input Voltage): This pin is connected to the input voltage source.
- VOUT (Output Voltage): This pin provides the regulated output voltage.
- GND (Ground): This pin is connected to the ground reference.
Functional Features
- Voltage regulation: XC61HC1812MR-G ensures a stable output voltage regardless of input voltage fluctuations.
- Overcurrent protection: It incorporates overcurrent protection to safeguard the connected circuitry.
- Low power consumption: The device consumes minimal power, making it suitable for battery-powered applications.
- Fast response time: It quickly responds to changes in input voltage, maintaining a stable output.
Advantages and Disadvantages
Advantages
- High precision voltage regulation
- Wide operating temperature range
- Small form factor
- Low power consumption
- Excellent stability and reliability
Disadvantages
- Limited output current capacity (100mA)
- Not suitable for high-power applications
Working Principles
XC61HC1812MR-G utilizes a combination of internal circuitry and feedback mechanisms to regulate the output voltage. It compares the actual output voltage with a reference voltage and adjusts the internal circuitry accordingly to maintain a stable output.
Detailed Application Field Plans
XC61HC1812MR-G finds applications in various electronic devices and circuits, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered systems
Detailed and Complete Alternative Models
Some alternative models that can be considered as alternatives to XC61HC1812MR-G are: - XC61CC1812MR-G - XC61DC1812MR-G - XC61EC1812MR-G - XC61FC1812MR-G
These models offer similar characteristics and specifications, providing flexibility in choosing the most suitable component for specific applications.
Word count: 465 words
10個與XC61HC1812MR-G在技術方案中應用相關的常見問題與解答
Sure! Here are 10 common questions and answers related to the application of XC61HC1812MR-G in technical solutions:
Q: What is XC61HC1812MR-G? A: XC61HC1812MR-G is a voltage detector IC manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.
Q: What is the operating voltage range of XC61HC1812MR-G? A: The operating voltage range of XC61HC1812MR-G is typically between 0.8V and 6.0V.
Q: How does XC61HC1812MR-G work? A: XC61HC1812MR-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below or exceeds the reference voltage, it triggers an output signal.
Q: What is the output type of XC61HC1812MR-G? A: XC61HC1812MR-G has an open-drain output type, which means it can be connected to other devices through a pull-up resistor.
Q: What is the quiescent current consumption of XC61HC1812MR-G? A: The quiescent current consumption of XC61HC1812MR-G is typically around 1.0µA, making it suitable for low-power applications.
Q: Can XC61HC1812MR-G be used for overvoltage protection? A: No, XC61HC1812MR-G is primarily designed for undervoltage detection. It does not provide overvoltage protection functionality.
Q: What is the typical response time of XC61HC1812MR-G? A: The typical response time of XC61HC1812MR-G is around 200µs, allowing for quick detection of voltage changes.
Q: Can XC61HC1812MR-G be used in automotive applications? A: Yes, XC61HC1812MR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the temperature range of XC61HC1812MR-G? A: XC61HC1812MR-G has an operating temperature range of -40°C to +85°C, making it suitable for a wide range of environments.
Q: Can XC61HC1812MR-G be used in battery-powered devices? A: Yes, XC61HC1812MR-G's low quiescent current consumption makes it well-suited for battery-powered devices where power efficiency is crucial.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.