Torex Semiconductor Ltd
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
XC6124A446MR-G
詳情 數據表

XC6124A446MR-G

Product Overview

Category

XC6124A446MR-G belongs to the category of voltage regulators.

Use

It is commonly used for regulating voltage in electronic circuits.

Characteristics

  • Small size and lightweight
  • Low power consumption
  • High precision voltage regulation
  • Wide input voltage range
  • Overcurrent protection
  • Thermal shutdown protection

Package

XC6124A446MR-G is available in a small surface-mount package.

Essence

The essence of XC6124A446MR-G lies in its ability to provide stable and regulated voltage output for various electronic devices.

Packaging/Quantity

The product is typically packaged in reels or tape and reel packaging, with a quantity of 3000 units per reel.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage Range: 1.2V - 5.5V
  • Output Current: 150mA (maximum)
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6124A446MR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Voltage regulation: XC6124A446MR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent protection: The device automatically shuts down when the output current exceeds the maximum limit.
  • Thermal shutdown protection: In case of excessive temperature, the regulator enters a thermal shutdown mode to prevent damage.

Advantages and Disadvantages

Advantages

  • Compact size and lightweight make it suitable for space-constrained applications.
  • Low power consumption helps in energy-efficient designs.
  • Wide input voltage range allows compatibility with various power sources.
  • Overcurrent and thermal shutdown protection enhance the safety and reliability of the circuit.

Disadvantages

  • Limited output current capacity may not be suitable for high-power applications.
  • Dropout voltage may cause a slight voltage drop across the regulator.

Working Principles

XC6124A446MR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6124A446MR-G finds applications in various electronic devices, including but not limited to: - Mobile phones - Portable media players - Digital cameras - Wearable devices - IoT devices - Battery-powered systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6124A446MR-G are: - XC6206P332MR-G - XC6210B332MR-G - XC6220B332MR-G - XC6221B332MR-G - XC6222B332MR-G

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

In conclusion, XC6124A446MR-G is a compact and efficient voltage regulator that provides stable voltage output for various electronic devices. Its small size, low power consumption, and built-in protection features make it suitable for a wide range of applications.

10個與XC6124A446MR-G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XC6124A446MR-G in technical solutions:

  1. Question: What is XC6124A446MR-G?
    - Answer: XC6124A446MR-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6124A446MR-G?
    - Answer: The operating voltage range of XC6124A446MR-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6124A446MR-G work?
    - Answer: XC6124A446MR-G works by continuously monitoring the input voltage and comparing it with a preset threshold voltage. When the input voltage falls below the threshold, the output of the IC changes state, indicating a power failure or low voltage condition.

  4. Question: What is the output configuration of XC6124A446MR-G?
    - Answer: XC6124A446MR-G has an open-drain output configuration, which means that it can be connected to other devices through a pull-up resistor to achieve different logic levels.

  5. Question: What is the typical quiescent current consumption of XC6124A446MR-G?
    - Answer: The typical quiescent current consumption of XC6124A446MR-G is very low, usually around 1.0µA.

  6. Question: Can XC6124A446MR-G be used for overvoltage protection?
    - Answer: No, XC6124A446MR-G is specifically designed for undervoltage detection and does not provide overvoltage protection.

  7. Question: What is the response time of XC6124A446MR-G?
    - Answer: The response time of XC6124A446MR-G is typically very fast, usually within a few microseconds.

  8. Question: Can XC6124A446MR-G be used in automotive applications?
    - Answer: Yes, XC6124A446MR-G is suitable for automotive applications as it can operate within the specified temperature range and has low power consumption.

  9. Question: Is XC6124A446MR-G RoHS compliant?
    - Answer: Yes, XC6124A446MR-G is RoHS (Restriction of Hazardous Substances) compliant, which means it does not contain any restricted substances.

  10. Question: Can XC6124A446MR-G be used in battery-powered devices?
    - Answer: Yes, XC6124A446MR-G is commonly used in battery-powered devices due to its low quiescent current consumption, which helps conserve battery life.

Please note that the answers provided here are general and may vary depending on specific application requirements. It is always recommended to refer to the datasheet and consult with the manufacturer for detailed information.