Torex Semiconductor Ltd
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
XC6122A631ER-G
詳情 數據表

XC6122A631ER-G

Product Overview

Category

XC6122A631ER-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Compact size
  • Low power consumption
  • High precision
  • Wide input voltage range

Package

XC6122A631ER-G comes in a small surface-mount package.

Essence

The essence of XC6122A631ER-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

It is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 3.3V
  • Output Current: 150mA
  • Dropout Voltage: 200mV (max)
  • Quiescent Current: 1μA (typ)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6122A631ER-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin
  4. CE: Chip enable pin

Functional Features

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages

  • Small form factor
  • High precision voltage regulation
  • Wide input voltage range
  • Low power consumption

Disadvantages

  • Limited output current capacity
  • Not suitable for high-power applications

Working Principles

XC6122A631ER-G operates based on the principle of feedback control. It compares the output voltage with a reference voltage and adjusts the internal circuitry to maintain a stable output voltage.

Detailed Application Field Plans

XC6122A631ER-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Wearable devices - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6122A631ER-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

These models offer similar functionality and specifications, providing options for different design requirements.

Note: The content provided above is approximately 300 words. Additional information may be required to reach the desired word count of 1100 words.

10個與XC6122A631ER-G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XC6122A631ER-G in technical solutions:

  1. Question: What is XC6122A631ER-G?
    - Answer: XC6122A631ER-G is a voltage detector IC (integrated circuit) manufactured by Torex Semiconductor. It is commonly used for monitoring power supply voltages in various electronic devices.

  2. Question: What is the operating voltage range of XC6122A631ER-G?
    - Answer: The operating voltage range of XC6122A631ER-G is typically between 0.8V and 6.0V.

  3. Question: How does XC6122A631ER-G work?
    - Answer: XC6122A631ER-G works by comparing the input voltage with a fixed reference voltage. When the input voltage falls below a certain threshold, it triggers an output signal indicating a low voltage condition.

  4. Question: What is the output type of XC6122A631ER-G?
    - Answer: XC6122A631ER-G has an open-drain output type, which means it can be connected to other devices or circuits for further processing.

  5. Question: What is the typical quiescent current consumption of XC6122A631ER-G?
    - Answer: The typical quiescent current consumption of XC6122A631ER-G is very low, usually around 1.0µA.

  6. Question: Can XC6122A631ER-G be used for undervoltage detection?
    - Answer: Yes, XC6122A631ER-G is specifically designed for undervoltage detection, making it suitable for applications where monitoring low voltage conditions is critical.

  7. Question: What is the accuracy of XC6122A631ER-G?
    - Answer: The accuracy of XC6122A631ER-G is typically ±1.5% at room temperature.

  8. Question: Can XC6122A631ER-G be used in automotive applications?
    - Answer: Yes, XC6122A631ER-G is AEC-Q100 qualified, making it suitable for automotive applications that require high reliability and performance.

  9. Question: Does XC6122A631ER-G have any built-in delay time?
    - Answer: Yes, XC6122A631ER-G has a built-in fixed delay time of approximately 200ms to prevent false triggering due to voltage fluctuations or noise.

  10. Question: What package does XC6122A631ER-G come in?
    - Answer: XC6122A631ER-G is available in a SOT-23-3 package, which is a small surface-mount package commonly used in electronic devices.

Please note that the answers provided here are general and may vary depending on the specific datasheet and application requirements.