XC6118C32BGR-G

Product Overview

Use

It is used to regulate and stabilize the voltage in electronic circuits.

Characteristics

Package: BGA (Ball Grid Array)
Essence: Voltage regulator IC (Integrated Circuit)
Packaging/Quantity: Tape and Reel, 3000 pieces per reel

Specifications

The specifications for XC6118C32BGR-G are as follows:

Input Voltage Range: 2.5V to 6.0V
Output Voltage: 3.2V
Output Current: 150mA
Dropout Voltage: 200mV (typical)
Quiescent Current: 40µA (typical)
Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C32BGR-G has the following pin configuration:

VIN (Input Voltage)
GND (Ground)
VOUT (Output Voltage)

Functional Features

The functional features of XC6118C32BGR-G include:

Low dropout voltage
Low quiescent current
Overcurrent protection
Thermal shutdown protection
Short-circuit protection

Advantages and Disadvantages

Advantages: - Small package size - Wide input voltage range - Low dropout voltage - Overcurrent and thermal protection

Disadvantages: - Limited output current capacity (150mA)

Working Principles

XC6118C32BGR-G works by regulating the input voltage to a stable output voltage of 3.2V. It achieves this through internal circuitry that adjusts the voltage based on the feedback received from the output. The device continuously monitors the output voltage and makes necessary adjustments to maintain a constant voltage level.

Detailed Application Field Plans

XC6118C32BGR-G can be used in various applications, including but not limited to: - Battery-powered devices - Portable electronic devices - IoT (Internet of Things) devices - Consumer electronics - Automotive electronics

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6118C32BGR-G are: - XC6206P332MR-G - LM1117IMPX-3.3/NOPB - MCP1700T-3302E/TT

10個與XC6118C32BGR-G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XC6118C32BGR-G in technical solutions:

Q: What is XC6118C32BGR-G? A: XC6118C32BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C32BGR-G? A: The operating voltage range of XC6118C32BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C32BGR-G help in technical solutions? A: XC6118C32BGR-G helps in technical solutions by providing a reliable reset signal to microcontrollers, microprocessors, or other digital devices when the power supply voltage falls below a specified level.
Q: What is the typical reset voltage threshold of XC6118C32BGR-G? A: The typical reset voltage threshold of XC6118C32BGR-G is 3.2V.
Q: Can XC6118C32BGR-G be used in battery-powered applications? A: Yes, XC6118C32BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes very low quiescent current.
Q: Does XC6118C32BGR-G have any built-in delay time for the reset signal? A: Yes, XC6118C32BGR-G has a built-in delay time of approximately 200ms to ensure stable operation during power-up or power-down transitions.
Q: Is XC6118C32BGR-G available in different package options? A: Yes, XC6118C32BGR-G is available in various package options, including SOT-25 and USP-4B.
Q: Can XC6118C32BGR-G be used in automotive applications? A: Yes, XC6118C32BGR-G is suitable for automotive applications as it meets the AEC-Q100 automotive qualification standards.
Q: What is the maximum operating temperature range of XC6118C32BGR-G? A: The maximum operating temperature range of XC6118C32BGR-G is typically -40°C to +85°C.
Q: Are there any application notes or reference designs available for XC6118C32BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help in implementing XC6118C32BGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific datasheet and documentation provided by the manufacturer of XC6118C32BGR-G.