Torex Semiconductor Ltd
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
XC6118C29CGR-G
詳情 數據表

XC6118C29CGR-G

Product Overview

Category

XC6118C29CGR-G belongs to the category of voltage regulators.

Use

It is commonly used in electronic circuits to regulate and stabilize voltage levels.

Characteristics

  • Voltage regulation capability
  • Compact size
  • Low power consumption
  • High efficiency
  • Wide input voltage range

Package

XC6118C29CGR-G is available in a small form factor package, making it suitable for space-constrained applications.

Essence

The essence of XC6118C29CGR-G lies in its ability to provide stable and regulated voltage output.

Packaging/Quantity

This product is typically packaged in reels or tubes, with a quantity of 3000 units per reel/tube.

Specifications

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 2.9V
  • Output Current: 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 30µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

XC6118C29CGR-G has the following pin configuration:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. VOUT: Output voltage pin

Functional Features

  • Voltage Regulation: XC6118C29CGR-G ensures a stable output voltage regardless of input voltage fluctuations.
  • Overcurrent Protection: It incorporates overcurrent protection to safeguard connected devices.
  • Thermal Shutdown: The device automatically shuts down if the temperature exceeds a certain threshold, preventing damage due to overheating.
  • Short Circuit Protection: XC6118C29CGR-G is equipped with short circuit protection to prevent damage in case of a short circuit.

Advantages and Disadvantages

Advantages

  • Compact size allows for easy integration into various electronic devices.
  • Low power consumption helps conserve energy.
  • Wide input voltage range makes it compatible with different power sources.
  • High efficiency ensures minimal power loss during voltage regulation.

Disadvantages

  • Limited output current may not be suitable for high-power applications.
  • Dropout voltage of 200mV may affect the overall efficiency in certain scenarios.

Working Principles

XC6118C29CGR-G operates based on a feedback control mechanism. It compares the output voltage to a reference voltage and adjusts the internal circuitry to maintain a stable output voltage. This feedback loop continuously monitors and regulates the output voltage, compensating for any variations in the input voltage or load conditions.

Detailed Application Field Plans

XC6118C29CGR-G finds applications in various electronic systems, including but not limited to: - Battery-powered devices - Portable consumer electronics - IoT devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

Some alternative models that offer similar functionality to XC6118C29CGR-G are: - LM317: A popular linear voltage regulator with adjustable output voltage. - LT1763: A low dropout (LDO) voltage regulator with high accuracy and low quiescent current. - TPS7A4700: An ultra-low noise LDO voltage regulator suitable for sensitive audio applications.

These alternative models can be considered based on specific requirements and design constraints.

(Note: The content provided above is approximately 300 words. Additional information can be added to meet the required word count of 1100 words.)

10個與XC6118C29CGR-G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XC6118C29CGR-G in technical solutions:

  1. Q: What is XC6118C29CGR-G? A: XC6118C29CGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.

  2. Q: What is the operating voltage range of XC6118C29CGR-G? A: The operating voltage range of XC6118C29CGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6118C29CGR-G help in technical solutions? A: XC6118C29CGR-G helps in technical solutions by ensuring proper power supply voltage levels, preventing malfunctions or data corruption due to low voltage conditions.

  4. Q: Can XC6118C29CGR-G be used in battery-powered applications? A: Yes, XC6118C29CGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.

  5. Q: What is the output type of XC6118C29CGR-G? A: XC6118C29CGR-G has an open-drain output type, which allows for flexibility in connecting external components.

  6. Q: What is the typical reset threshold voltage of XC6118C29CGR-G? A: The typical reset threshold voltage of XC6118C29CGR-G is 2.9V.

  7. Q: Does XC6118C29CGR-G have built-in hysteresis? A: Yes, XC6118C29CGR-G has built-in hysteresis of typically 0.1V, which helps to prevent oscillation near the threshold voltage.

  8. Q: Can XC6118C29CGR-G be used in automotive applications? A: Yes, XC6118C29CGR-G is suitable for automotive applications as it meets the AEC-Q100 Grade 2 qualification standards.

  9. Q: What is the package type of XC6118C29CGR-G? A: XC6118C29CGR-G is available in a compact SOT-25 package, which is small and easy to integrate into various designs.

  10. Q: Is XC6118C29CGR-G RoHS compliant? A: Yes, XC6118C29CGR-G is RoHS (Restriction of Hazardous Substances) compliant, ensuring environmental friendliness and safety.

Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C29CGR-G.