XC6118C25BGR-G belongs to the category of voltage regulators.
It is commonly used in electronic circuits to regulate and stabilize voltage levels.
The specifications of XC6118C25BGR-G are as follows:
XC6118C25BGR-G has the following pin configuration:
The functional features of XC6118C25BGR-G include:
Advantages: - Stable output voltage - Low dropout voltage - Low quiescent current
Disadvantages: - Limited output current capacity (150mA)
XC6118C25BGR-G operates based on the principle of linear voltage regulation. It uses a feedback mechanism to compare the output voltage with a reference voltage and adjusts the internal circuitry to maintain a constant output voltage of 2.5V.
XC6118C25BGR-G finds applications in various electronic devices and circuits, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Embedded systems
Some alternative models that can be considered as alternatives to XC6118C25BGR-G are: - LM1117-2.5 - MCP1700-2502E/TO - TS2950CT-2.5
These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.
Note: The content provided above is approximately 250 words. Additional information can be added to meet the required word count of 1100 words.
Sure! Here are 10 common questions and answers related to the application of XC6118C25BGR-G in technical solutions:
Q: What is XC6118C25BGR-G? A: XC6118C25BGR-G is a voltage detector IC (integrated circuit) that monitors the power supply voltage and provides a reset signal when the voltage drops below a certain threshold.
Q: What is the operating voltage range of XC6118C25BGR-G? A: The operating voltage range of XC6118C25BGR-G is typically between 0.9V and 6.0V.
Q: How does XC6118C25BGR-G help in technical solutions? A: XC6118C25BGR-G helps ensure stable operation of electronic devices by providing a reset signal when the power supply voltage falls below a specified level, preventing erratic behavior or data corruption.
Q: Can XC6118C25BGR-G be used in battery-powered applications? A: Yes, XC6118C25BGR-G can be used in battery-powered applications as it has a low quiescent current consumption of typically 1.0µA.
Q: What is the typical reset threshold voltage of XC6118C25BGR-G? A: The typical reset threshold voltage of XC6118C25BGR-G is 2.5V.
Q: Does XC6118C25BGR-G have an adjustable reset threshold voltage? A: No, XC6118C25BGR-G has a fixed reset threshold voltage of 2.5V.
Q: Can XC6118C25BGR-G provide a manual reset function? A: Yes, XC6118C25BGR-G has a manual reset input pin that can be used to force a reset signal.
Q: What is the output type of XC6118C25BGR-G? A: XC6118C25BGR-G has an open-drain output, which requires an external pull-up resistor.
Q: Is XC6118C25BGR-G available in different package options? A: Yes, XC6118C25BGR-G is available in various package options, such as SOT-23-5 and USP-6B.
Q: Can XC6118C25BGR-G withstand high temperatures? A: XC6118C25BGR-G has a maximum operating temperature of 125°C, making it suitable for a wide range of applications.
Please note that the answers provided here are general and may vary depending on the specific datasheet and manufacturer's specifications of XC6118C25BGR-G.