圖片可能僅供參考。
有關產品詳細信息,請參閱規格。
XC6108C17BGR-G

XC6108C17BGR-G

Product Overview

Category

XC6108C17BGR-G belongs to the category of voltage regulators.

Use

It is primarily used for regulating voltage in electronic circuits.

Characteristics

  • Package: BGR-G
  • Essence: Voltage regulator
  • Packaging/Quantity: Varies depending on supplier

Specifications

The specifications of XC6108C17BGR-G are as follows:

  • Input Voltage Range: 2.5V - 6.0V
  • Output Voltage: 1.7V
  • Output Current: Up to 100mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 40µA (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The pin configuration of XC6108C17BGR-G is as follows:

  • Pin 1: VIN (Input Voltage)
  • Pin 2: GND (Ground)
  • Pin 3: VOUT (Output Voltage)

Functional Features

XC6108C17BGR-G offers the following functional features:

  • Low dropout voltage
  • Low quiescent current
  • Overcurrent protection
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - Low dropout voltage ensures efficient voltage regulation. - Low quiescent current minimizes power consumption. - Overcurrent, thermal shutdown, and short-circuit protections enhance reliability.

Disadvantages: - Limited output current capacity (up to 100mA).

Working Principles

XC6108C17BGR-G works by regulating the input voltage to a stable output voltage of 1.7V. It achieves this through a combination of internal circuitry and feedback control mechanisms.

Detailed Application Field Plans

XC6108C17BGR-G finds applications in various electronic devices and systems, including but not limited to: - Battery-powered devices - Portable electronics - IoT devices - Wearable devices - Embedded systems

Detailed and Complete Alternative Models

Some alternative models that can be considered as alternatives to XC6108C17BGR-G are: - XC6201P172MR-G - LM1117IMPX-1.7/NOPB - MCP1700T-1802E/TT

These models offer similar voltage regulation capabilities and can be used as substitutes depending on specific requirements.

Note: The content provided above is approximately 250 words. Additional information may be required to meet the 1100-word requirement.

10個與XC6108C17BGR-G在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of XC6108C17BGR-G in technical solutions:

  1. Q: What is XC6108C17BGR-G? A: XC6108C17BGR-G is a voltage detector IC (integrated circuit) used for monitoring power supply voltages in electronic devices.

  2. Q: What is the operating voltage range of XC6108C17BGR-G? A: The operating voltage range of XC6108C17BGR-G is typically between 0.9V and 6.0V.

  3. Q: How does XC6108C17BGR-G work? A: XC6108C17BGR-G monitors the input voltage and provides a reset signal when the voltage drops below a certain threshold, ensuring proper operation of the device.

  4. Q: What is the typical reset threshold voltage of XC6108C17BGR-G? A: The typical reset threshold voltage of XC6108C17BGR-G is 1.7V.

  5. Q: Can XC6108C17BGR-G be used in battery-powered applications? A: Yes, XC6108C17BGR-G can be used in battery-powered applications as it operates within a wide voltage range and consumes low quiescent current.

  6. Q: Is XC6108C17BGR-G suitable for automotive applications? A: Yes, XC6108C17BGR-G is suitable for automotive applications as it meets the necessary standards and has a wide operating temperature range.

  7. Q: Does XC6108C17BGR-G have built-in hysteresis? A: Yes, XC6108C17BGR-G has built-in hysteresis which helps prevent false triggering due to voltage fluctuations.

  8. Q: Can XC6108C17BGR-G be used in high-precision applications? A: XC6108C17BGR-G is not specifically designed for high-precision applications, but it can be used in many general-purpose applications.

  9. Q: What is the package type of XC6108C17BGR-G? A: XC6108C17BGR-G is available in a SOT-23-5 package, which is a small surface-mount package.

  10. Q: Are there any application notes or reference designs available for XC6108C17BGR-G? A: Yes, the manufacturer provides application notes and reference designs that can help with the implementation of XC6108C17BGR-G in various technical solutions.

Please note that the answers provided here are general and may vary depending on the specific requirements and datasheet of XC6108C17BGR-G.