The TPS3801-01DCKR belongs to the category of voltage supervisors.
It is primarily used for monitoring and supervising the voltage levels in electronic systems.
The TPS3801-01DCKR is available in a small SC-70-5 package.
The essence of the TPS3801-01DCKR is its ability to accurately monitor voltage levels and provide a reset signal when necessary.
The TPS3801-01DCKR is typically packaged in reels, with 3000 units per reel.
The TPS3801-01DCKR has the following pin configuration:
The TPS3801-01DCKR operates by comparing the voltage at the SENSE pin with the preset threshold voltage. If the voltage drops below the threshold, indicating a potential power loss or fault condition, the device generates a reset signal. The reset time delay ensures that momentary voltage fluctuations do not trigger false resets.
The TPS3801-01DCKR finds application in various electronic systems where reliable voltage monitoring and reset functionality are crucial. Some potential application fields include:
These alternative models offer similar functionalities to the TPS3801-01DCKR, catering to different voltage monitoring requirements and system specifications.
Word count: 515 words
Sure! Here are 10 common questions and answers related to the application of TPS3801-01DCKR in technical solutions:
Q1: What is TPS3801-01DCKR? A1: TPS3801-01DCKR is a voltage supervisor and reset IC manufactured by Texas Instruments.
Q2: What is the purpose of TPS3801-01DCKR? A2: The purpose of TPS3801-01DCKR is to monitor the voltage level of a system and generate a reset signal when the voltage falls below a certain threshold.
Q3: What is the operating voltage range of TPS3801-01DCKR? A3: TPS3801-01DCKR operates within a voltage range of 0.8V to 5.5V.
Q4: How does TPS3801-01DCKR generate a reset signal? A4: TPS3801-01DCKR generates a reset signal by pulling the RESET pin low when the monitored voltage falls below the specified threshold.
Q5: Can TPS3801-01DCKR be used in battery-powered applications? A5: Yes, TPS3801-01DCKR can be used in battery-powered applications as it operates within a wide voltage range and has low quiescent current consumption.
Q6: What is the typical reset threshold voltage of TPS3801-01DCKR? A6: The typical reset threshold voltage of TPS3801-01DCKR is 2.93V.
Q7: Does TPS3801-01DCKR have an adjustable reset threshold? A7: No, TPS3801-01DCKR has a fixed reset threshold voltage and does not have an adjustable feature.
Q8: Can TPS3801-01DCKR be used in automotive applications? A8: Yes, TPS3801-01DCKR is suitable for automotive applications as it meets the AEC-Q100 qualification requirements.
Q9: What is the maximum operating temperature range of TPS3801-01DCKR? A9: The maximum operating temperature range of TPS3801-01DCKR is -40°C to 125°C.
Q10: Does TPS3801-01DCKR have any built-in delay before generating a reset signal? A10: Yes, TPS3801-01DCKR has a fixed delay of approximately 200ms before generating a reset signal to allow for stabilization of the system voltage.
Please note that these answers are based on general information about TPS3801-01DCKR and may vary depending on specific application requirements.