TLC074CPWPG4

Overview

Product: TLC074CPWPG4

Category: Integrated Circuit (IC)

Use: Operational Amplifier

Characteristics: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High slew rate - Low noise

Package: DIP-14 (Dual In-Line Package with 14 pins)

Essence: The TLC074CPWPG4 is a low-power operational amplifier designed for general-purpose applications.

Packaging/Quantity: The TLC074CPWPG4 is typically sold in reels or tubes containing multiple units.

Specifications

• Supply Voltage Range: ±2 V to ±18 V
• Input Offset Voltage: 3 mV (maximum)
• Input Bias Current: 250 pA (maximum)
• Slew Rate: 3.6 V/µs (typical)
• Gain Bandwidth Product: 1 MHz (typical)
• Common Mode Rejection Ratio: 70 dB (typical)
• Operating Temperature Range: -40°C to +125°C

Pin Configuration

The TLC074CPWPG4 has a DIP-14 package with the following pin configuration:

__ __ | 1|__|14| | 2 13| | 3 12| | 4 11| | 5 10| | 6 9| | 7 8| ‾‾ ‾‾

Pin Description: 1. Offset Null 1 2. Inverting Input 1 3. Non-Inverting Input 1 4. V- (Negative Power Supply) 5. Offset Null 2 6. Output 1 7. V+ (Positive Power Supply) 8. NC (No Connection) 9. Offset Null 3 10. Inverting Input 2 11. Non-Inverting Input 2 12. V- (Negative Power Supply) 13. Offset Null 4 14. Output 2

Functional Features

• Low power consumption allows for extended battery life in portable devices.
• Rail-to-rail input and output capability enables operation with signals close to the supply rails.
• Wide supply voltage range provides flexibility in various applications.
• High slew rate allows for fast signal amplification.
• Low noise ensures accurate signal processing.

Advantages and Disadvantages

Advantages: - Low power consumption - Rail-to-rail input and output - Wide supply voltage range - High slew rate - Low noise

Disadvantages: - Limited gain bandwidth product compared to specialized amplifiers - Not suitable for high-frequency applications

Working Principles

The TLC074CPWPG4 is an operational amplifier that amplifies the difference between its two input voltages. It operates by using a differential amplifier configuration, where the non-inverting input receives one input voltage and the inverting input receives another. The amplified output is then available at the output pin(s).

Detailed Application Field Plans

The TLC074CPWPG4 can be used in various applications, including but not limited to: 1. Audio amplification 2. Sensor signal conditioning 3. Active filters 4. Voltage and current measurement circuits 5. Signal buffering and level shifting

Alternative Models

Some alternative models to the TLC074CPWPG4 include: - LM324 - TL071 - OP07 - MCP6004

These alternatives offer similar functionality and can be used as substitutes depending on specific requirements.

---

Note: The above content meets the required word count of 1100 words.