Texas Instruments
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
SN74LVC2T45DCTR
詳情 數據表

SN74LVC2T45DCTR

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Level Shifter
  • Characteristics: Bi-directional voltage level translation with automatic direction sensing
  • Package: 8-pin TSSOP (Thin Shrink Small Outline Package)
  • Essence: Voltage level shifting between two different logic levels
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Supply Voltage Range: 1.65V to 5.5V
  • High-Level Input Voltage: 2.3V to VCC + 0.5V
  • Low-Level Input Voltage: -0.5V to 0.8V
  • High-Level Output Voltage: VCC - 0.4V
  • Low-Level Output Voltage: 0.4V
  • Maximum Operating Frequency: 100 MHz
  • Propagation Delay: 6 ns (Max)

Detailed Pin Configuration

The SN74LVC2T45DCTR has a total of 8 pins:

  1. OE (Output Enable) - Active low output enable input
  2. A1 - Bi-directional data I/O line 1
  3. GND (Ground) - Ground reference
  4. B1 - Bi-directional data I/O line 2
  5. VCC - Positive power supply
  6. B2 - Bi-directional data I/O line 2
  7. A2 - Bi-directional data I/O line 1
  8. VCC - Positive power supply

Functional Features

  • Bi-directional voltage level translation between two different logic levels
  • Automatic direction sensing eliminates the need for direction control signals
  • Supports bidirectional communication between devices operating at different voltage levels
  • Wide supply voltage range allows compatibility with various systems
  • Fast switching speed and low propagation delay ensure efficient data transfer

Advantages and Disadvantages

Advantages: - Simplifies interfacing between devices with different voltage levels - Automatic direction sensing reduces the complexity of control signals - Wide supply voltage range enhances compatibility - Fast switching speed enables high-speed data transfer

Disadvantages: - Limited to two logic level translation, not suitable for multi-level systems - Requires careful consideration of voltage level compatibility to avoid damage

Working Principles

The SN74LVC2T45DCTR is a level shifter IC that facilitates voltage level translation between two different logic levels. It operates by automatically sensing the direction of data flow and adjusting the voltage levels accordingly. The device uses a combination of MOSFETs and CMOS technology to achieve bidirectional communication.

Detailed Application Field Plans

The SN74LVC2T45DCTR finds applications in various fields where voltage level translation is required. Some common application areas include:

  1. Communication Systems: Facilitating communication between devices operating at different voltage levels, such as UART, I2C, SPI interfaces.
  2. Embedded Systems: Enabling connectivity between microcontrollers or digital signal processors operating at different voltage levels.
  3. Consumer Electronics: Supporting voltage level translation in devices like smartphones, tablets, and gaming consoles.
  4. Industrial Automation: Integrating different components of automation systems that operate at different logic levels.
  5. Automotive Electronics: Enabling communication between various electronic modules in vehicles.

Detailed and Complete Alternative Models

  1. TXB0108PWR: 8-bit Bidirectional Voltage-Level Translator with Automatic Direction Sensing
  2. PCA9306DCUR: Dual Bi-Directional I2C-Bus and SMBus Voltage-Level Translator
  3. SN74LVC2T45DCTRG4: 2-bit Dual-Supply Bus Transceiver with Configurable Voltage Translation and 3-State Outputs

These alternative models offer similar functionality and can be considered as alternatives to the SN74LVC2T45DCTR.

Word count: 450 words

10個與SN74LVC2T45DCTR在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of SN74LVC2T45DCTR in technical solutions:

  1. Q: What is SN74LVC2T45DCTR? A: SN74LVC2T45DCTR is a dual-bit, dual-supply voltage level translator with configurable voltage-level shifting capabilities.

  2. Q: What is the purpose of SN74LVC2T45DCTR? A: SN74LVC2T45DCTR is used to translate logic levels between different voltage domains, enabling communication between devices operating at different voltage levels.

  3. Q: What voltage levels can SN74LVC2T45DCTR support? A: SN74LVC2T45DCTR supports voltage translation between two voltage domains, typically ranging from 1.2V to 5.5V.

  4. Q: How many channels does SN74LVC2T45DCTR have? A: SN74LVC2T45DCTR has two independent bidirectional channels, allowing for simultaneous translation of two different signals.

  5. Q: Can SN74LVC2T45DCTR handle bi-directional communication? A: Yes, SN74LVC2T45DCTR supports bi-directional data transfer, making it suitable for applications where data needs to be transmitted in both directions.

  6. Q: What is the maximum data rate supported by SN74LVC2T45DCTR? A: SN74LVC2T45DCTR can support data rates up to 100 Mbps, making it suitable for various high-speed communication protocols.

  7. Q: Does SN74LVC2T45DCTR require external pull-up or pull-down resistors? A: No, SN74LVC2T45DCTR has built-in pull-up and pull-down resistors, eliminating the need for external components in most cases.

  8. Q: Can SN74LVC2T45DCTR handle level shifting between different voltage domains in mixed-signal applications? A: Yes, SN74LVC2T45DCTR is suitable for level shifting between digital and analog signals, making it useful in mixed-signal applications.

  9. Q: Is SN74LVC2T45DCTR compatible with I2C and SPI interfaces? A: Yes, SN74LVC2T45DCTR can be used to interface devices operating at different voltage levels in I2C and SPI communication protocols.

  10. Q: What is the package type of SN74LVC2T45DCTR? A: SN74LVC2T45DCTR is available in a small footprint, surface-mount package known as TSSOP (Thin Shrink Small Outline Package).

Please note that these answers are general and may vary depending on specific application requirements.