SN74CBTD3384CPW

Product Overview

• Category: Integrated Circuit
• Use: Signal Switching and Level Shifting
• Characteristics: High-speed, Low-power, Bidirectional
• Package: TSSOP (Thin Shrink Small Outline Package)
• Essence: Multiplexer/Demultiplexer with Voltage Translation
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: 2 V to 3.6 V
• Input Voltage Range: 0 V to VCC
• Output Voltage Range: 0 V to VCC
• On-state Resistance: 5 Ω (typical)
• Bandwidth: 400 MHz (typical)
• Number of Channels: 10

Detailed Pin Configuration

1. A0 - Channel Select Input
2. A1 - Channel Select Input
3. A2 - Channel Select Input
4. OE - Output Enable Input
5. GND - Ground
6. B0 - Channel Select Input
7. B1 - Channel Select Input
8. B2 - Channel Select Input
9. VCC - Power Supply
10. Y - Output

Functional Features

• Bidirectional signal switching between two independent buses
• Voltage level translation between different logic families
• Low power consumption
• High-speed operation
• ESD protection on all pins
• Break-before-make switching action

Advantages

• Enables seamless integration of multiple logic families in a single system
• Provides efficient signal routing and level shifting capabilities
• Offers reliable ESD protection for enhanced durability
• Supports high-speed data transmission
• Low power consumption helps conserve energy

Disadvantages

• Limited number of channels (10 in this case)
• Requires careful consideration of voltage compatibility between input and output signals

Working Principles

The SN74CBTD3384CPW is a multiplexer/demultiplexer IC that allows bidirectional signal switching between two independent buses. It also provides voltage level translation, making it suitable for integrating different logic families within a single system. The device operates by selectively connecting the input signals to the output based on the channel select inputs (A0-A2 and B0-B2). The output enable input (OE) controls the output state, enabling or disabling the signal transmission. The IC features break-before-make switching action to prevent any potential short circuits during the transition.

Detailed Application Field Plans

The SN74CBTD3384CPW finds applications in various fields where signal switching and level shifting are required. Some of the common application areas include:

1. Communication Systems: Used for signal routing and level translation in communication equipment such as routers, switches, and modems.
2. Industrial Automation: Enables seamless integration of different logic families in industrial control systems, PLCs (Programmable Logic Controllers), and motor drives.
3. Automotive Electronics: Facilitates signal switching and level shifting in automotive electronic systems, including infotainment systems, instrument clusters, and body control modules.
4. Consumer Electronics: Utilized in devices like smartphones, tablets, and gaming consoles for efficient signal routing and voltage level translation.
5. Medical Devices: Enables reliable signal switching and level shifting in medical equipment such as patient monitors, diagnostic devices, and imaging systems.

Detailed and Complete Alternative Models

• SN74CBTD3306CDBR
• SN74CBTD3384CDGVR
• SN74CBTD3384PW

(Note: This list is not exhaustive and there may be other alternative models available in the market.)

Word Count: 489