Texas Instruments
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
INA226AIDGSR
詳情 數據表

INA226AIDGSR

Product Overview

Category: Integrated Circuit (IC)

Use: The INA226AIDGSR is a high-side current shunt and power monitor IC. It is designed to accurately measure current, voltage, and power in various applications.

Characteristics: - High accuracy - Low offset voltage - Wide input voltage range - Programmable alert functions - Small package size

Package: The INA226AIDGSR comes in a small 10-pin VSSOP package.

Essence: This IC provides precise measurements of current and voltage, making it ideal for monitoring power consumption in electronic devices.

Packaging/Quantity: The INA226AIDGSR is typically sold in reels containing 2500 units.

Specifications

  • Supply Voltage Range: 2.7V to 5.5V
  • Current Measurement Range: ±1.2A
  • Voltage Measurement Range: 0V to 36V
  • Accuracy:
    • Current: ±0.1%
    • Voltage: ±0.4%
  • Operating Temperature Range: -40°C to +125°C

Pin Configuration

The INA226AIDGSR has the following pin configuration:

  1. V+ (Positive Power Supply)
  2. V- (Negative Power Supply)
  3. SDA (I2C Serial Data)
  4. SCL (I2C Serial Clock)
  5. ALERT (Alert Output)
  6. A0 (Address Select Bit 0)
  7. A1 (Address Select Bit 1)
  8. NC (No Connection)
  9. OUT (Voltage Output)
  10. GND (Ground)

Functional Features

  • High-side current sensing
  • Bidirectional current measurement
  • Programmable conversion times
  • Alert functionality for overcurrent or undervoltage conditions
  • I2C interface for communication with microcontrollers

Advantages and Disadvantages

Advantages: - High accuracy measurements - Wide input voltage range - Programmable alert functions - Small package size for space-constrained applications

Disadvantages: - Limited current measurement range (±1.2A) - Requires external components for proper operation

Working Principles

The INA226AIDGSR operates by measuring the voltage across a shunt resistor in series with the load. By using an internal amplifier, it converts this voltage into a proportional current signal. The IC then performs analog-to-digital conversion and provides digital output through the I2C interface.

Detailed Application Field Plans

The INA226AIDGSR can be used in various applications, including:

  1. Battery monitoring systems
  2. Power management in portable devices
  3. Industrial automation and control systems
  4. Solar power systems
  5. Electric vehicle charging stations

Alternative Models

Here are some alternative models that offer similar functionality to the INA226AIDGSR:

  1. INA219: Similar high-side current shunt monitor IC with I2C interface.
  2. MAX471: Current sense amplifier with integrated shunt resistor.
  3. ACS712: Hall effect-based current sensor with analog output.

These alternative models provide options for different requirements and design considerations.

In conclusion, the INA226AIDGSR is a highly accurate and versatile IC designed for precise current and voltage measurements. Its small package size and programmable features make it suitable for a wide range of applications. However, designers should consider the limited current measurement range and the need for external components when using this IC.

10個與INA226AIDGSR在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of INA226AIDGSR in technical solutions:

  1. Q: What is the INA226AIDGSR? A: The INA226AIDGSR is a high-side current shunt and power monitor IC that can measure both voltage and current with high accuracy.

  2. Q: What are the key features of the INA226AIDGSR? A: The key features include high accuracy, low offset voltage, wide input voltage range, programmable alert thresholds, and I2C interface for easy integration.

  3. Q: How does the INA226AIDGSR measure current? A: The INA226AIDGSR measures current by sensing the voltage across an external shunt resistor connected in series with the load.

  4. Q: Can the INA226AIDGSR measure both positive and negative currents? A: No, the INA226AIDGSR can only measure positive currents. For bidirectional current measurement, you would need additional circuitry.

  5. Q: What is the typical accuracy of the INA226AIDGSR? A: The INA226AIDGSR has a typical accuracy of ±0.1% for voltage measurement and ±1% for current measurement.

  6. Q: Can the INA226AIDGSR measure power as well? A: Yes, the INA226AIDGSR can calculate power by multiplying the measured voltage and current values.

  7. Q: How do I configure the INA226AIDGSR for my specific application? A: You can configure the INA226AIDGSR using the I2C interface and programming registers to set parameters such as voltage range, current range, and alert thresholds.

  8. Q: Can the INA226AIDGSR generate alerts based on certain conditions? A: Yes, the INA226AIDGSR has programmable alert thresholds that can trigger an interrupt or set a flag when specific conditions are met.

  9. Q: What is the maximum voltage and current that the INA226AIDGSR can handle? A: The INA226AIDGSR can handle a maximum voltage of 36V and a maximum current of ±3.2A.

  10. Q: In what applications can the INA226AIDGSR be used? A: The INA226AIDGSR is commonly used in various applications such as power supplies, battery management systems, motor control, solar inverters, and energy monitoring systems.

Please note that these answers are general and may vary depending on the specific requirements and implementation of the INA226AIDGSR in your technical solution.