TYN1012TRG
Introduction
The TYN1012TRG is a semiconductor device belonging to the category of Thyristors, commonly used in power control applications. This entry provides an overview of the TYN1012TRG, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
Basic Information Overview
- Category: Thyristor
- Use: Power control applications
- Characteristics: High voltage capability, high surge current capability, sensitive gate triggering, low holding current
- Package: TO-220AB
- Essence: Semiconductor device for power control
- Packaging/Quantity: Available in reels or tubes, quantity varies by manufacturer
Specifications
- Voltage - Off State: 600V
- Voltage - Gate Trigger (Max): 1.5V
- Current - On State (It (RMS)) (Max): 12A
- Current - Non Rep. Surge 50, 60Hz (Itsm): 120A
- Current - Gate Trigger (Igt) (Max): 35mA
- Current - Hold (Ih) (Max): 15mA
- Operating Temperature: -40°C ~ 125°C
- Mounting Type: Through Hole
- Package / Case: TO-220-3
Detailed Pin Configuration
The TYN1012TRG has a standard TO-220AB package with three pins: 1. Anode (A) 2. Cathode (K) 3. Gate (G)
Functional Features
- Sensitive gate triggering
- High voltage capability
- Low holding current
- High surge current capability
Advantages and Disadvantages
Advantages
- Reliable power control
- Sensitive gate triggering for precise control
- High surge current capability for robustness
Disadvantages
- Limited maximum operating temperature
- Requires careful handling due to sensitivity to gate triggering voltage
Working Principles
The TYN1012TRG operates based on the principle of thyristor action, where it can be turned on by a gate signal and remains on until the anode current falls below a certain level. This allows for efficient power control in various applications.
Detailed Application Field Plans
The TYN1012TRG finds extensive use in the following applications: - AC phase control - Industrial heating - Motor control - Lighting control - Power supplies
Detailed and Complete Alternative Models
Some alternative models to the TYN1012TRG include: - TYN612 - TYN812 - TYN1016 - TYN202
In summary, the TYN1012TRG is a versatile thyristor with high voltage and surge current capabilities, making it suitable for a wide range of power control applications.
[Word count: 366]
10個與TYN1012TRG在技術方案中應用相關的常見問題與解答
What is TYN1012TRG?
- TYN1012TRG is a silicon controlled rectifier (SCR) designed for use in high temperature and high energy applications.
What are the key features of TYN1012TRG?
- TYN1012TRG features a high surge capability, high on-state current, and a wide range of gate trigger currents.
What are the typical applications of TYN1012TRG?
- TYN1012TRG is commonly used in motor control, industrial automation, and power supply applications.
What is the maximum operating temperature of TYN1012TRG?
- The maximum operating temperature of TYN1012TRG is typically 125°C.
What is the recommended mounting method for TYN1012TRG?
- TYN1012TRG is typically mounted using a through-hole or surface mount technique, following the manufacturer's guidelines.
What are the voltage and current ratings of TYN1012TRG?
- TYN1012TRG has a voltage rating of up to 1200V and a current rating of up to 12A.
How does TYN1012TRG handle overcurrent conditions?
- TYN1012TRG features a built-in overcurrent protection mechanism to safeguard against excessive current flow.
What are the recommended storage conditions for TYN1012TRG?
- TYN1012TRG should be stored in a cool, dry place with minimal exposure to moisture and extreme temperatures.
Can TYN1012TRG be used in AC or DC applications?
- TYN1012TRG is suitable for both AC and DC applications, providing flexibility in various technical solutions.
Are there any specific precautions to consider when using TYN1012TRG?
- It is important to follow proper ESD handling procedures and adhere to the specified operating and handling guidelines provided by the manufacturer when using TYN1012TRG.