M24128-BFMC6TG

Product Overview

• Category: Integrated Circuit (IC)
• Use: Non-volatile Memory
• Characteristics: High capacity, Serial I2C Interface, Low power consumption
• Package: SO8 (Small Outline 8-pin package)
• Essence: EEPROM (Electrically Erasable Programmable Read-Only Memory)
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Memory Capacity: 128 Kbit (16 Kilobytes)
• Interface: I2C (Inter-Integrated Circuit)
• Operating Voltage: 1.7V to 5.5V
• Operating Temperature Range: -40°C to +85°C
• Write Endurance: 4 Million cycles
• Data Retention: 200 Years

Detailed Pin Configuration

The M24128-BFMC6TG IC has the following pin configuration:

| Pin Number | Pin Name | Description | |------------|----------|-------------| | 1 | A0 | Address Input Bit 0 | | 2 | A1 | Address Input Bit 1 | | 3 | A2 | Address Input Bit 2 | | 4 | VSS | Ground | | 5 | SDA | Serial Data Input/Output | | 6 | SCL | Serial Clock Input | | 7 | WP | Write Protect Input | | 8 | VCC | Power Supply |

Functional Features

• High-speed I2C interface for easy integration into various systems.
• Low power consumption, making it suitable for battery-powered devices.
• Wide operating voltage range allows compatibility with different power supply levels.
• Reliable data retention and endurance ensure long-term storage and frequent write operations.

Advantages

• Compact SO8 package enables space-saving on PCBs.
• High memory capacity provides ample storage for various applications.
• I2C interface simplifies communication with other devices.
• Low power consumption prolongs battery life in portable devices.

Disadvantages

• Limited write endurance compared to some other non-volatile memory technologies.
• Sensitive to electrostatic discharge (ESD) and requires proper handling during installation.

Working Principles

The M24128-BFMC6TG is an EEPROM, which is a type of non-volatile memory that can be electrically erased and reprogrammed. It utilizes the I2C interface to communicate with the microcontroller or other devices. The memory cells store data by trapping charges in a floating gate, allowing the information to be retained even when power is removed.

Detailed Application Field Plans

The M24128-BFMC6TG is commonly used in various electronic systems, including but not limited to:

1. Consumer Electronics: Used for storing configuration settings, user preferences, and firmware updates in devices such as TVs, set-top boxes, and audio equipment.
2. Automotive: Employed in automotive electronics for storing critical data like mileage, vehicle settings, and error logs.
3. Industrial Control Systems: Utilized in industrial automation and control systems for storing calibration data, production parameters, and system configurations.
4. Medical Devices: Integrated into medical equipment for storing patient data, device settings, and firmware updates.
5. IoT (Internet of Things): Incorporated into IoT devices for storing sensor data, network configurations, and firmware updates.

Detailed and Complete Alternative Models

1. M24128-BRMN6TP: Similar specifications but available in a smaller 8-pin DFN package.
2. M24128-BWMN6TP: Higher endurance version with 1 million more write cycles.
3. M24128-BFMC6TP: Same specifications but available in a 5-pin SOT23 package.

Note: The above alternative models are just a few examples, and there may be other alternatives available from different manufacturers.

This encyclopedia entry provides an overview of the M24128-BFMC6TG, including its product category, use, characteristics, package, essence, packaging/quantity information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.