SSI Technologies Inc
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
P51-200-G-D-M12-4.5V-000-000
詳情 數據表

P51-200-G-D-M12-4.5V-000-000

Product Overview

Category

The P51-200-G-D-M12-4.5V-000-000 belongs to the category of precision pressure sensors.

Use

It is used for measuring and monitoring pressure in various industrial and commercial applications.

Characteristics

  • High precision
  • Compact design
  • Wide operating temperature range
  • Long-term stability

Package

The sensor is typically packaged in a protective casing to ensure durability and reliability.

Essence

The essence of the P51-200-G-D-M12-4.5V-000-000 lies in its ability to provide accurate and consistent pressure measurements in diverse environments.

Packaging/Quantity

The sensor is usually available as a single unit or in bulk quantities, depending on the supplier.

Specifications

  • Model: P51-200-G-D-M12-4.5V-000-000
  • Pressure Range: 0-200 psi
  • Output: 4.5V
  • Accuracy: ±0.5%
  • Operating Temperature: -40°C to 125°C
  • Electrical Connection: M12 connector

Detailed Pin Configuration

The P51-200-G-D-M12-4.5V-000-000 features a standard pin configuration with specific pins designated for power, ground, and signal output. The detailed pinout can be found in the product datasheet.

Functional Features

  • High accuracy and repeatability
  • Robust construction for harsh environments
  • Compatibility with various media types
  • Easy integration into existing systems

Advantages

  • Precise pressure measurement
  • Reliable performance in extreme conditions
  • Versatile application across industries
  • Low power consumption

Disadvantages

  • Higher initial cost compared to standard pressure sensors
  • May require specialized calibration equipment

Working Principles

The sensor operates on the principle of strain gauge technology, where changes in pressure cause deformation in the sensing element, resulting in a proportional change in electrical resistance. This change is then converted into an output voltage signal, providing an accurate representation of the applied pressure.

Detailed Application Field Plans

The P51-200-G-D-M12-4.5V-000-000 is suitable for a wide range of applications, including: - Industrial automation - Hydraulic systems - HVAC control - Process control - Aerospace and automotive industries

Detailed and Complete Alternative Models

  • P51-100-G-D-M12-4.5V-000-000: 0-100 psi pressure range
  • P51-300-G-D-M12-4.5V-000-000: 0-300 psi pressure range
  • P51-500-G-D-M12-4.5V-000-000: 0-500 psi pressure range

In conclusion, the P51-200-G-D-M12-4.5V-000-000 precision pressure sensor offers high accuracy, robustness, and versatility, making it an ideal choice for demanding pressure measurement applications across various industries.

[Word count: 398]

10個與P51-200-G-D-M12-4.5V-000-000在技術方案中應用相關的常見問題與解答

  1. What is the voltage rating of P51-200-G-D-M12-4.5V-000-000?

    • The voltage rating of P51-200-G-D-M12-4.5V-000-000 is 4.5V.

  2. What is the current rating of P51-200-G-D-M12-4.5V-000-000?

    • The current rating of P51-200-G-D-M12-4.5V-000-000 can vary based on the specific application and usage requirements. It's important to consult the datasheet or technical specifications for accurate information.

  3. What is the typical application of P51-200-G-D-M12-4.5V-000-000?

    • P51-200-G-D-M12-4.5V-000-000 is commonly used in sensor applications, automotive electronics, and industrial control systems where a reliable and precise voltage source is required.

  4. Is P51-200-G-D-M12-4.5V-000-000 suitable for outdoor use?

    • P51-200-G-D-M12-4.5V-000-000 may be suitable for outdoor use depending on its environmental ratings and protection features. It's essential to review the product specifications and consult with the manufacturer for outdoor applications.

  5. What are the dimensions of P51-200-G-D-M12-4.5V-000-000?

    • The dimensions of P51-200-G-D-M12-4.5V-000-000 can be found in the product datasheet or technical documentation provided by the manufacturer.

  6. Does P51-200-G-D-M12-4.5V-000-000 require any special cooling or heat dissipation measures?

    • Depending on the operating conditions and power dissipation characteristics, P51-200-G-D-M12-4.5V-000-000 may require appropriate cooling or heat dissipation measures. It's advisable to follow the guidelines provided in the product documentation.

  7. Can P51-200-G-D-M12-4.5V-000-000 be used in parallel or series configurations?

    • P51-200-G-D-M12-4.5V-000-000 can typically be used in parallel or series configurations, but it's important to consider the specific application requirements and consult the manufacturer's guidelines to ensure proper operation.

  8. What are the typical failure modes of P51-200-G-D-M12-4.5V-000-000?

    • Common failure modes of P51-200-G-D-M12-4.5V-000-000 may include overvoltage, overcurrent, thermal stress, and environmental damage. Proper design considerations and protective measures should be implemented to mitigate these risks.

  9. Are there any recommended EMI/EMC precautions when using P51-200-G-D-M12-4.5V-000-000?

    • To ensure electromagnetic compatibility and minimize potential interference issues, it's advisable to follow the EMI/EMC guidelines provided by the manufacturer and implement appropriate shielding and filtering measures.

  10. Where can I find detailed technical documentation and support for P51-200-G-D-M12-4.5V-000-000?

    • Detailed technical documentation and support for P51-200-G-D-M12-4.5V-000-000 can be obtained from the manufacturer's website, including datasheets, application notes, and direct customer support channels.