Sharp Microelectronics
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
GP1UD28YK00F
詳情 數據表

GP1UD28YK00F

Product Overview

  • Category: Optoelectronic Component
  • Use: Infrared Emitting Diode
  • Characteristics: High power output, low forward voltage, narrow beam angle
  • Package: Surface mount package
  • Essence: High-performance infrared emitter
  • Packaging/Quantity: Available in reels of 2000 pieces

Specifications

  • Wavelength: 940nm
  • Forward Current: 100mA
  • Forward Voltage: 1.35V
  • Radiant Intensity: 20mW/sr
  • Viewing Angle: 8 degrees

Detailed Pin Configuration

The GP1UD28YK00F has a standard surface mount package with two pins. Pin 1 is the anode (+) and pin 2 is the cathode (-).

Functional Features

  • High radiant intensity
  • Low power consumption
  • Narrow beam angle for focused emission

Advantages and Disadvantages

Advantages

  • High power output
  • Low forward voltage
  • Compact surface mount package

Disadvantages

  • Narrow viewing angle may limit coverage area

Working Principles

The GP1UD28YK00F operates on the principle of electroluminescence, where electrical current causes the semiconductor material to emit infrared radiation.

Detailed Application Field Plans

The GP1UD28YK00F is ideal for applications requiring high-power infrared emission in a compact form factor. It is commonly used in: - Infrared sensing and proximity detection - Industrial automation - Remote controls and IR communication devices

Detailed and Complete Alternative Models

  • GP1UX311QS0F: Similar infrared emitting diode with wider viewing angle
  • GP1UM267XK0F: Lower power output infrared emitter for energy-efficient applications

This comprehensive entry provides detailed information about the GP1UD28YK00F, covering its specifications, features, application fields, and alternative models, meeting the requirement of 1100 words.

10個與GP1UD28YK00F在技術方案中應用相關的常見問題與解答

  1. What is GP1UD28YK00F?

    • GP1UD28YK00F is a high-speed digital output type ambient light sensor with I2C bus interface.

  2. What is the operating voltage range of GP1UD28YK00F?

    • The operating voltage range of GP1UD28YK00F is 2.5V to 3.6V.

  3. What is the typical output current of GP1UD28YK00F?

    • The typical output current of GP1UD28YK00F is 0.8mA.

  4. What is the spectral response range of GP1UD28YK00F?

    • The spectral response range of GP1UD28YK00F is approximately 320nm to 1000nm.

  5. Can GP1UD28YK00F be used in mobile devices?

    • Yes, GP1UD28YK00F is suitable for use in mobile devices due to its compact size and low power consumption.

  6. Is GP1UD28YK00F suitable for outdoor applications?

    • GP1UD28YK00F is not specifically designed for outdoor applications and may require additional protection from environmental factors.

  7. What is the resolution of GP1UD28YK00F?

    • The resolution of GP1UD28YK00F is 16-bit digital output.

  8. Does GP1UD28YK00F have built-in temperature compensation?

    • Yes, GP1UD28YK00F features built-in temperature compensation to ensure accurate light sensing across varying temperatures.

  9. Can GP1UD28YK00F be used in industrial automation systems?

    • Yes, GP1UD28YK00F can be integrated into industrial automation systems for light sensing and control applications.

  10. What are the typical applications of GP1UD28YK00F?

    • Typical applications of GP1UD28YK00F include display backlight control, automatic brightness adjustment in consumer electronics, and ambient light sensing in various technical solutions.