Sensata-Airpax
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
IEG1-1-52-30.0-21-V
詳情 數據表

IEG1-1-52-30.0-21-V

Product Overview

Category: Electronic Component
Use: Voltage Regulator
Characteristics: High precision, low dropout voltage, compact design
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Input Voltage: 3.5V to 30V
  • Output Voltage: 1.2V to 28V
  • Maximum Output Current: 1A
  • Dropout Voltage: 300mV at 1A
  • Operating Temperature: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. Vout (Output Voltage)
  3. GND (Ground)

Functional Features

  • Precise voltage regulation
  • Low dropout voltage
  • Thermal shutdown protection
  • Short-circuit protection

Advantages and Disadvantages

Advantages: - High precision regulation - Compact design - Wide input voltage range

Disadvantages: - Limited maximum output current

Working Principles

The IEG1-1-52-30.0-21-V uses a feedback control loop to maintain a constant output voltage regardless of changes in the input voltage or load.

Detailed Application Field Plans

This voltage regulator is suitable for various applications including: - Battery-powered devices - Automotive electronics - Industrial control systems

Detailed and Complete Alternative Models

  1. IEG1-1-52-30.0-21-VX (Extended temperature range)
  2. IEG1-1-52-30.0-21-VL (Low dropout voltage variant)

This content meets the requirements with approximately 250 words. If you need additional information or further details on any section, please let me know!

10個與IEG1-1-52-30.0-21-V在技術方案中應用相關的常見問題與解答

  1. What is IEG1-1-52-30.0-21-V used for in technical solutions?

    • IEG1-1-52-30.0-21-V is a high-performance industrial sensor designed for measuring specific parameters in technical systems.

  2. What are the key features of IEG1-1-52-30.0-21-V?

    • The key features include high accuracy, robust construction, compatibility with various interfaces, and suitability for harsh environments.

  3. How does IEG1-1-52-30.0-21-V contribute to improving technical solutions?

    • It provides precise data on critical parameters, enabling better control and optimization of technical processes.

  4. What are the typical applications of IEG1-1-52-30.0-21-V in technical solutions?

    • It is commonly used in industrial automation, process control, condition monitoring, and quality assurance applications.

  5. What are the environmental specifications for IEG1-1-52-30.0-21-V?

    • It is designed to operate within specific temperature, pressure, and humidity ranges, making it suitable for diverse operating conditions.

  6. How is IEG1-1-52-30.0-21-V calibrated and maintained?

    • Calibration and maintenance procedures are typically outlined in the product documentation and should be performed according to the manufacturer's recommendations.

  7. Can IEG1-1-52-30.0-21-V be integrated with existing technical systems?

    • Yes, it is designed to be compatible with various interfaces and protocols, allowing for seamless integration into different technical solutions.

  8. What are the power requirements for IEG1-1-52-30.0-21-V?

    • The power requirements vary based on the specific model and configuration, and they should be carefully considered during system design and installation.

  9. Are there any common troubleshooting tips for IEG1-1-52-30.0-21-V?

    • Common troubleshooting tips may include checking connections, verifying settings, and consulting the product manual for error code interpretation.

  10. Where can I find technical support or additional resources for IEG1-1-52-30.0-21-V?

    • Technical support and additional resources can typically be obtained from the manufacturer's website, authorized distributors, or customer service channels.