Sensata-Airpax
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
CR11-52-10.0A-S06IV-V
詳情 數據表

CR11-52-10.0A-S06IV-V

Product Category: Electrical Components

Basic Information Overview:

  • Category: Current Regulator
  • Use: To regulate and control the flow of electrical current within a circuit
  • Characteristics: Precision current regulation, high efficiency, compact design
  • Package: Sealed in a protective casing to prevent damage from environmental factors
  • Essence: Ensures stable and consistent current flow in electrical systems
  • Packaging/Quantity: Typically packaged individually, quantity varies based on manufacturer's specifications

Specifications:

  • Model: CR11-52-10.0A-S06IV-V
  • Current Rating: 10.0A
  • Voltage Rating: S06IV-V
  • Dimensions: Standard industry size (specific dimensions available upon request)

Detailed Pin Configuration:

  • Pin 1: Input +
  • Pin 2: Input -
  • Pin 3: Output +
  • Pin 4: Output -

Functional Features:

  • Precise current regulation
  • Overcurrent protection
  • Thermal shutdown feature
  • Wide input voltage range

Advantages and Disadvantages:

  • Advantages:
    • Ensures stable current flow
    • Compact design
    • Overcurrent protection enhances safety
  • Disadvantages:
    • May require additional heat dissipation in high-current applications
    • Initial cost may be higher compared to basic regulators

Working Principles:

The CR11-52-10.0A-S06IV-V operates by continuously monitoring the current flow in the circuit and adjusting its internal components to maintain a steady output current, regardless of fluctuations in the input voltage.

Detailed Application Field Plans:

  • Industrial automation
  • Power supply units
  • LED lighting systems
  • Automotive electronics

Detailed and Complete Alternative Models:

  • CR11-52-8.0A-S06IV-V
  • CR11-52-12.0A-S06IV-V
  • CR11-52-10.0A-S08IV-V

This comprehensive range of alternative models provides options for different current requirements and voltage ratings.

[Word count: 298]

10個與CR11-52-10.0A-S06IV-V在技術方案中應用相關的常見問題與解答

  1. What is the CR11-52-10.0A-S06IV-V used for in technical solutions?

    • The CR11-52-10.0A-S06IV-V is a current transformer commonly used for measuring and monitoring electrical currents in various technical applications.

  2. What is the accuracy of the CR11-52-10.0A-S06IV-V?

    • The accuracy of the CR11-52-10.0A-S06IV-V is typically specified by the manufacturer and can vary, but it is commonly designed to meet industry standards for accurate current measurement.

  3. What is the voltage rating of the CR11-52-10.0A-S06IV-V?

    • The voltage rating of the CR11-52-10.0A-S06IV-V is typically specified by the manufacturer and can vary, but it is commonly designed to withstand the voltage levels present in typical technical solutions.

  4. How is the CR11-52-10.0A-S06IV-V installed in a technical system?

    • The CR11-52-10.0A-S06IV-V is typically installed by clamping it around the conductor through which the current is to be measured, following the manufacturer's installation guidelines.

  5. What are the environmental conditions that the CR11-52-10.0A-S06IV-V can operate in?

    • The CR11-52-10.0A-S06IV-V is designed to operate within specific temperature, humidity, and other environmental limits, as specified by the manufacturer.

  6. Can the CR11-52-10.0A-S06IV-V be used for both AC and DC current measurements?

    • The CR11-52-10.0A-S06IV-V is commonly designed for measuring AC currents, but there may be models suitable for DC current measurements as well. It's important to check the specifications for compatibility.

  7. What are the typical applications of the CR11-52-10.0A-S06IV-V in technical solutions?

    • The CR11-52-10.0A-S06IV-V is commonly used in power distribution systems, energy management systems, industrial automation, and other technical solutions requiring accurate current measurement.

  8. Does the CR11-52-10.0A-S06IV-V require calibration?

    • The CR11-52-10.0A-S06IV-V may require periodic calibration to ensure accurate measurements, as recommended by the manufacturer or industry standards.

  9. Are there any safety considerations when using the CR11-52-10.0A-S06IV-V?

    • Users should follow proper safety procedures when installing and working with the CR11-52-10.0A-S06IV-V, including de-energizing circuits before installation and following all relevant safety guidelines.

  10. Where can I find the datasheet and technical specifications for the CR11-52-10.0A-S06IV-V?

    • The datasheet and technical specifications for the CR11-52-10.0A-S06IV-V can typically be obtained from the manufacturer's website or by contacting their customer support.