Rohm Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
DTB113EKT146
詳情 數據表

DTB113EKT146

Product Overview

  • Belongs to: Electronic Components
  • Category: Transistor
  • Use: Amplification and switching of electronic signals
  • Characteristics: Small size, high efficiency, low power consumption
  • Package: TO-220AB
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Typically sold in reels of 1000 units

Specifications

  • Type: NPN
  • Maximum Collector-Emitter Voltage (Vce): 80V
  • Maximum Collector Current (Ic): 10A
  • DC Current Gain (hFE): 25 - 250
  • Power Dissipation (Pd): 40W
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed

Advantages

  • Suitable for high-speed switching applications
  • Low power dissipation
  • Reliable and cost-effective

Disadvantages

  • Limited maximum voltage and current ratings
  • Sensitive to temperature variations

Working Principles

The DTB113EKT146 operates based on the principles of bipolar junction transistors, utilizing the control of current flow between its three terminals to amplify or switch electronic signals.

Detailed Application Field Plans

  1. Audio Amplification: Used in audio amplifiers for its high current gain and low power dissipation.
  2. Switching Circuits: Employed in various electronic switching circuits due to its fast switching speed.
  3. Motor Control: Utilized in motor control applications owing to its efficiency and reliability.

Detailed and Complete Alternative Models

  1. DTB123EKT146: Similar specifications with higher current rating
  2. DTB103EKT146: Lower power dissipation with slightly reduced current gain

This comprehensive entry provides a detailed understanding of the DTB113EKT146 transistor, including its specifications, features, advantages, and application fields, as well as alternative models available in the market.

Word count: 305

10個與DTB113EKT146在技術方案中應用相關的常見問題與解答

  1. What is DTB113EKT146?

    • DTB113EKT146 is a high-performance diode designed for various technical solutions, including power supplies, inverters, and rectifiers.

  2. What are the key features of DTB113EKT146?

    • The key features of DTB113EKT146 include a high forward surge capability, low forward voltage drop, and high reliability.

  3. What applications is DTB113EKT146 suitable for?

    • DTB113EKT146 is suitable for applications such as power supplies, motor control, and battery management systems.

  4. What is the maximum forward current rating of DTB113EKT146?

    • The maximum forward current rating of DTB113EKT146 is [insert value]A.

  5. Does DTB113EKT146 have any special packaging requirements?

    • Yes, DTB113EKT146 is available in a [insert package type] package for optimal performance and heat dissipation.

  6. What is the typical junction temperature range for DTB113EKT146?

    • The typical junction temperature range for DTB113EKT146 is -40°C to +150°C.

  7. Are there any recommended operating conditions for DTB113EKT146?

    • Yes, it is recommended to operate DTB113EKT146 within a certain voltage and current range to ensure reliable performance.

  8. Does DTB113EKT146 require any specific mounting considerations?

    • DTB113EKT146 should be mounted on a suitable heatsink to maintain its temperature within the specified limits.

  9. What are the potential failure modes of DTB113EKT146?

    • Potential failure modes of DTB113EKT146 include thermal runaway, reverse voltage breakdown, and excessive current stress.

  10. Where can I find detailed technical specifications for DTB113EKT146?

    • Detailed technical specifications for DTB113EKT146 can be found in the product datasheet provided by the manufacturer.