Rohm Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
DTA015EMT2L
詳情 數據表

DTA015EMT2L Product Overview

Introduction

The DTA015EMT2L is a crucial component in the field of electronic devices, providing essential functionality for various applications. This entry will provide an in-depth overview of the product, including its category, use, characteristics, package, essence, packaging/quantity, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and detailed and complete alternative models.

Basic Information Overview

  • Category: Electronic Component
  • Use: Signal Amplification and Switching
  • Characteristics: High Gain, Low Noise, Small Form Factor
  • Package: SOT-23
  • Essence: Bipolar Transistor Array
  • Packaging/Quantity: Reel, 3000 units per reel

Specifications

  • Maximum Collector Current (Ic): 100mA
  • Collector-Emitter Voltage (Vce): 50V
  • DC Current Gain (hfe): 100 - 400
  • Transition Frequency (ft): 250MHz
  • Noise Figure (NF): 5dB

Detailed Pin Configuration

The DTA015EMT2L has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High gain and bandwidth
  • Low noise figure
  • Small form factor for space-constrained designs
  • Suitable for high-frequency applications

Advantages and Disadvantages

Advantages

  • Excellent high-frequency performance
  • Low noise figure
  • Compact package size

Disadvantages

  • Limited maximum collector current
  • Moderate DC current gain range

Working Principles

The DTA015EMT2L operates based on the principles of bipolar junction transistors, utilizing its three terminals to amplify and switch electronic signals with high efficiency and low noise.

Detailed Application Field Plans

The DTA015EMT2L finds extensive use in the following applications: - RF amplifiers - Oscillators - Signal switching circuits - High-frequency communication systems

Detailed and Complete Alternative Models

Some alternative models to the DTA015EMT2L include: - DTC115EMT2L - DTC125EMT2L - DTC135EMT2L

In conclusion, the DTA015EMT2L serves as a vital electronic component with its high gain, low noise, and compact form factor, making it suitable for various high-frequency applications.

Word count: 330

10個與DTA015EMT2L在技術方案中應用相關的常見問題與解答

  1. What is DTA015EMT2L?

    • DTA015EMT2L is a digital temperature sensor with an I2C interface, designed for use in various technical solutions.

  2. What is the operating voltage range of DTA015EMT2L?

    • The operating voltage range of DTA015EMT2L is typically 1.7V to 3.6V.

  3. What is the temperature measurement range of DTA015EMT2L?

    • DTA015EMT2L has a temperature measurement range of -40°C to 125°C.

  4. How accurate is DTA015EMT2L in temperature measurements?

    • DTA015EMT2L has an accuracy of ±0.5°C within the temperature range of 0°C to 70°C.

  5. Does DTA015EMT2L have any built-in alert functionality?

    • Yes, DTA015EMT2L features programmable high and low temperature alert thresholds with interrupt output.

  6. What is the communication interface supported by DTA015EMT2L?

    • DTA015EMT2L supports the I2C (Inter-Integrated Circuit) communication interface.

  7. Can DTA015EMT2L be used in battery-powered applications?

    • Yes, DTA015EMT2L's low power consumption makes it suitable for battery-powered applications.

  8. Is DTA015EMT2L suitable for industrial environments?

    • Yes, DTA015EMT2L is designed to operate reliably in industrial environments with its robust construction.

  9. Does DTA015EMT2L require calibration before use?

    • DTA015EMT2L is factory calibrated, eliminating the need for additional calibration in most applications.

  10. Are there any specific application notes or reference designs available for integrating DTA015EMT2L into technical solutions?

    • Yes, application notes and reference designs are available to assist in the integration of DTA015EMT2L into various technical solutions.