Rohm Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
BR93G46FVT-3GE2
詳情 數據表

BR93G46FVT-3GE2

Introduction

The BR93G46FVT-3GE2 is a versatile integrated circuit belonging to the category of non-volatile memory devices. This entry provides an overview of its basic information, specifications, detailed pin configuration, functional features, advantages and disadvantages, working principles, detailed application field plans, and alternative models.

Basic Information Overview

  • Category: Non-volatile Memory Device
  • Use: Data storage and retrieval in electronic systems
  • Characteristics: High reliability, low power consumption, small form factor
  • Package: SOP-8 (Small Outline Package)
  • Essence: Stores data without requiring power supply
  • Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Memory Capacity: 1Kbit
  • Interface: Serial I2C
  • Operating Voltage: 1.7V to 5.5V
  • Operating Temperature: -40°C to 85°C
  • Write Endurance: 10^6 cycles
  • Data Retention: 100 years

Detailed Pin Configuration

  1. VSS (Ground)
  2. SDA (Serial Data)
  3. SCL (Serial Clock)
  4. WP (Write Protect)
  5. VCC (Power Supply)
  6. NC (No Connection)
  7. NC (No Connection)
  8. VSS (Ground)

Functional Features

  • Sequential Read Function: Allows sequential reading of memory contents
  • Self-timed Write Cycle: Simplifies write operations
  • Software Write Protection: Prevents accidental writes to memory
  • Partial Page Write: Enables efficient data storage

Advantages and Disadvantages

Advantages

  • Low power consumption
  • Small form factor
  • High reliability

Disadvantages

  • Limited memory capacity
  • Slower read/write speeds compared to volatile memory

Working Principles

The BR93G46FVT-3GE2 utilizes electrically erasable programmable read-only memory (EEPROM) technology. It stores data by trapping electrons in a floating gate, ensuring that the stored information remains intact even when the power is removed.

Detailed Application Field Plans

The BR93G46FVT-3GE2 finds applications in various electronic systems, including: - Automotive electronics for storing vehicle parameters and settings - Industrial control systems for configuration storage - Consumer electronics for firmware and parameter storage

Detailed and Complete Alternative Models

  • AT24C01C
  • CAT24C01
  • M24C01-WMN6TP

In conclusion, the BR93G46FVT-3GE2 offers reliable non-volatile memory storage with low power consumption and a small form factor, making it suitable for a wide range of electronic applications.

Word Count: 411

10個與BR93G46FVT-3GE2在技術方案中應用相關的常見問題與解答

  1. What is the BR93G46FVT-3GE2?

    • The BR93G46FVT-3GE2 is a serial EEPROM (Electrically Erasable Programmable Read-Only Memory) with a capacity of 1Kbit (128x8 bits).

  2. What are the typical applications of BR93G46FVT-3GE2 in technical solutions?

    • The BR93G46FVT-3GE2 is commonly used for storing configuration data, calibration parameters, and other small amounts of non-volatile data in various electronic devices such as industrial equipment, automotive systems, and consumer electronics.

  3. What is the operating voltage range of BR93G46FVT-3GE2?

    • The operating voltage range of BR93G46FVT-3GE2 is typically from 1.8V to 5.5V, making it suitable for a wide range of applications.

  4. Can BR93G46FVT-3GE2 be used in automotive applications?

    • Yes, BR93G46FVT-3GE2 is suitable for automotive applications due to its robustness, low power consumption, and wide operating voltage range.

  5. What is the maximum data retention of BR93G46FVT-3GE2?

    • The BR93G46FVT-3GE2 has a minimum data retention of 40 years at 85°C, ensuring long-term reliability for critical data storage.

  6. Does BR93G46FVT-3GE2 support high-speed data transfer?

    • Yes, BR93G46FVT-3GE2 supports high-speed SPI (Serial Peripheral Interface) communication, enabling fast and efficient data transfer.

  7. Is BR93G46FVT-3GE2 compatible with industrial temperature ranges?

    • Yes, BR93G46FVT-3GE2 is designed to operate reliably within industrial temperature ranges, making it suitable for harsh environments.

  8. Can multiple BR93G46FVT-3GE2 devices be cascaded together?

    • Yes, multiple BR93G46FVT-3GE2 devices can be cascaded together to expand the storage capacity as needed in a system.

  9. What are the key features that make BR93G46FVT-3GE2 suitable for IoT applications?

    • The low power consumption, small form factor, and reliable performance of BR93G46FVT-3GE2 make it well-suited for IoT (Internet of Things) devices with limited power and space constraints.

  10. Are there any specific design considerations when using BR93G46FVT-3GE2 in technical solutions?

    • Designers should consider proper decoupling, signal integrity, and ESD protection measures to ensure optimal performance and reliability when integrating BR93G46FVT-3GE2 into their technical solutions.