Richtek USA Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
RT9024GE
詳情 數據表

RT9024GE

Product Overview

  • Category: Voltage Regulator
  • Use: Regulates voltage in electronic circuits
  • Characteristics: High efficiency, low dropout voltage, small package size
  • Package: SOT-23-5
  • Essence: Monolithic CMOS LDO regulator
  • Packaging/Quantity: Tape and reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 6.0V
  • Output Voltage Range: 1.2V to 5.0V
  • Output Current: Up to 300mA
  • Dropout Voltage: 200mV (typical)
  • Quiescent Current: 50μA (typical)
  • Line Regulation: ±0.2% (typical)
  • Load Regulation: ±0.3% (typical)
  • Ripple Rejection: 70dB (typical)
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The RT9024GE has a total of five pins:

  1. VIN: Input voltage pin
  2. GND: Ground pin
  3. EN: Enable pin (active high)
  4. BYP: Bypass capacitor pin
  5. VOUT: Output voltage pin

Functional Features

  • Low dropout voltage ensures efficient power conversion
  • Excellent line and load regulation for stable output voltage
  • Built-in thermal shutdown and current limit protection
  • Fast transient response for sudden load changes
  • Low quiescent current prolongs battery life in portable devices

Advantages and Disadvantages

Advantages

  • High efficiency operation
  • Small package size allows for space-saving designs
  • Wide input voltage range provides flexibility in various applications
  • Good ripple rejection minimizes noise interference
  • Thermal shutdown and current limit protection enhance reliability

Disadvantages

  • Limited output current capability (up to 300mA)
  • Dropout voltage may be higher compared to other regulators
  • Requires an external bypass capacitor for optimal performance

Working Principles

The RT9024GE is a monolithic CMOS low dropout voltage regulator. It regulates the input voltage to a stable output voltage by utilizing a pass transistor and feedback control circuitry. The device operates by comparing the output voltage with a reference voltage, adjusting the pass transistor accordingly to maintain the desired output voltage.

Detailed Application Field Plans

The RT9024GE is commonly used in various electronic devices and applications, including:

  1. Mobile phones and smartphones
  2. Tablet computers
  3. Portable media players
  4. Wireless communication devices
  5. Battery-powered devices
  6. Industrial and automotive electronics
  7. IoT (Internet of Things) devices
  8. Wearable technology

Detailed and Complete Alternative Models

  1. RT9024AGB: Similar specifications, different package (SOT-89-5)
  2. RT9024FGQW: Higher output current (up to 500mA), same package (SOT-23-5)
  3. RT9024BGQW: Lower quiescent current (30μA), same package (SOT-23-5)
  4. RT9024DGQW: Adjustable output voltage, same package (SOT-23-5)

These alternative models offer similar functionality and characteristics, providing options for different design requirements.

Word count: 346 words

10個與RT9024GE在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of RT9024GE in technical solutions:

  1. Q: What is RT9024GE? A: RT9024GE is a low dropout (LDO) voltage regulator IC commonly used in electronic circuits to provide stable and regulated power supply.

  2. Q: What is the input voltage range for RT9024GE? A: The input voltage range for RT9024GE is typically between 2.5V and 5.5V.

  3. Q: What is the output voltage range of RT9024GE? A: The output voltage range of RT9024GE can be adjusted from 0.8V to the input voltage minus 0.3V.

  4. Q: What is the maximum output current of RT9024GE? A: The maximum output current of RT9024GE is typically around 300mA.

  5. Q: Can RT9024GE operate in both linear and dropout modes? A: Yes, RT9024GE can operate in both linear mode (VIN - VOUT > 1.5V) and dropout mode (VIN - VOUT < 1.5V).

  6. Q: Does RT9024GE have built-in thermal shutdown protection? A: Yes, RT9024GE has built-in thermal shutdown protection to prevent overheating and damage.

  7. Q: Is RT9024GE suitable for battery-powered applications? A: Yes, RT9024GE is suitable for battery-powered applications due to its low quiescent current and low dropout voltage.

  8. Q: Can RT9024GE handle input voltage fluctuations? A: Yes, RT9024GE has good input voltage stability and can handle input voltage fluctuations within its specified range.

  9. Q: Can RT9024GE be used in automotive applications? A: Yes, RT9024GE is designed to meet automotive-grade requirements and can be used in automotive applications.

  10. Q: Are there any recommended external components for using RT9024GE? A: Yes, to ensure stability and performance, it is recommended to use input/output capacitors and a bypass capacitor with RT9024GE.

Please note that the answers provided here are general and may vary depending on specific application requirements and datasheet specifications.