Power Integrations
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
LNK626PG
詳情 數據表

LNK626PG

Product Overview

Category: Integrated Circuit (IC)

Use: Power Management IC

Characteristics: - Low power consumption - High efficiency - Compact size - Wide input voltage range - Over-temperature protection - Over-voltage protection - Short-circuit protection

Package: PG-DIP-7

Essence: LNK626PG is a power management integrated circuit designed for efficient power conversion and control.

Packaging/Quantity: The LNK626PG is available in a standard PG-DIP-7 package. It is typically sold in reels of 2500 units.

Specifications

  • Input Voltage Range: 85V AC to 265V AC
  • Output Power: Up to 5W
  • Output Voltage: 5V DC
  • Efficiency: Up to 85%
  • Operating Temperature Range: -40°C to +150°C
  • Frequency Range: 66 kHz to 132 kHz
  • Standby Power Consumption: Less than 30 mW

Detailed Pin Configuration

The LNK626PG has the following pin configuration:

  1. VDD: Power supply input
  2. BP/M: Bypass/Multifunction pin
  3. FB: Feedback pin
  4. GND: Ground
  5. D: Drain pin
  6. S: Source pin
  7. NC: No connection

Functional Features

  1. Primary-Side Control: The LNK626PG utilizes primary-side control to regulate the output voltage, eliminating the need for an optocoupler or secondary-side feedback circuitry.
  2. Auto-restart Protection: In the event of a fault condition such as over-temperature, over-voltage, or short-circuit, the LNK626PG automatically enters into auto-restart mode to protect the system.
  3. Frequency Jittering: The IC incorporates frequency jittering to reduce electromagnetic interference (EMI) and meet regulatory standards.
  4. Cycle-by-Cycle Current Limiting: The LNK626PG ensures accurate current limiting by monitoring the current on a cycle-by-cycle basis, providing reliable protection against overloads.

Advantages and Disadvantages

Advantages: - High efficiency power conversion - Compact size for space-constrained applications - Wide input voltage range for universal compatibility - Built-in protection features for enhanced reliability - Primary-side control eliminates the need for optocouplers

Disadvantages: - Limited output power (up to 5W) - Requires external components for complete power supply design

Working Principles

The LNK626PG is based on the LinkSwitch-TN2 topology, which integrates a high-voltage power MOSFET, a multi-mode PWM controller, and a high-voltage start-up circuitry into a single chip. It operates by converting the high-voltage AC input into a regulated low-voltage DC output through a combination of switching and control techniques.

The primary-side control architecture eliminates the need for an optocoupler, reducing component count and cost while improving overall system reliability. The IC utilizes various protection mechanisms such as over-temperature, over-voltage, and short-circuit protection to safeguard the system from faults.

Detailed Application Field Plans

The LNK626PG is widely used in various applications, including but not limited to: - Power adapters - LED lighting - Auxiliary power supplies - Industrial controls - Home appliances

Its compact size, high efficiency, and built-in protection features make it suitable for a wide range of power management applications.

Detailed and Complete Alternative Models

  1. LNK625PG: Similar to LNK626PG but with lower output power capability (up to 3W).
  2. LNK627PG: Similar to LNK626PG but with higher output power capability (up to 8W).
  3. LNK628PG: Similar to LNK626PG but with additional features such as adjustable output voltage and current limiting.

These alternative models provide flexibility in power supply design based on specific application requirements.

Word count: 525 words

10個與LNK626PG在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of LNK626PG in technical solutions:

  1. Q: What is LNK626PG? A: LNK626PG is a highly integrated, offline switcher IC designed for low-power applications.

  2. Q: What are the key features of LNK626PG? A: LNK626PG features include primary-side regulation, high efficiency, accurate constant voltage (CV) and constant current (CC) control, and built-in protection features.

  3. Q: What are the typical applications of LNK626PG? A: LNK626PG is commonly used in LED lighting, smart home devices, IoT applications, and other low-power electronic systems.

  4. Q: How does LNK626PG achieve primary-side regulation? A: LNK626PG uses a proprietary algorithm called EcoSmart™ technology that enables primary-side regulation, eliminating the need for an optocoupler or secondary feedback circuitry.

  5. Q: Can LNK626PG operate in a wide input voltage range? A: Yes, LNK626PG can operate in a wide input voltage range, typically from 85VAC to 265VAC.

  6. Q: Does LNK626PG support dimming functionality for LED lighting applications? A: Yes, LNK626PG supports both analog and PWM dimming methods, making it suitable for various LED lighting designs.

  7. Q: What are the built-in protection features of LNK626PG? A: LNK626PG includes features like output overvoltage protection (OVP), output short-circuit protection (SCP), and thermal shutdown protection (TSD).

  8. Q: Is LNK626PG compliant with safety standards? A: Yes, LNK626PG is designed to meet international safety standards such as UL, CE, and ENEC.

  9. Q: Can LNK626PG be used in battery-powered applications? A: No, LNK626PG is primarily designed for offline applications and requires an AC power source.

  10. Q: Are there any evaluation boards or reference designs available for LNK626PG? A: Yes, Power Integrations provides evaluation boards and reference designs that can help engineers quickly prototype and implement LNK626PG-based solutions.

Please note that the answers provided here are general and may vary depending on specific application requirements.