Panasonic Industrial Automation Sales
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
GX-18MU-C5
詳情 數據表

GX-18MU-C5

Product Overview

Category: Electronic Component
Use: Signal Processing
Characteristics: High precision, compact design
Package: Surface mount
Essence: Signal conditioning and amplification
Packaging/Quantity: 100 pieces per reel

Specifications

  • Input Voltage: 3.3V
  • Output Voltage: 5V
  • Frequency Response: 10Hz - 100kHz
  • Operating Temperature: -40°C to 85°C
  • Dimensions: 3mm x 3mm x 1mm

Detailed Pin Configuration

  1. VCC
  2. GND
  3. IN
  4. OUT

Functional Features

  • Signal conditioning for precise amplification
  • Compact design for space-constrained applications
  • Wide frequency response for versatile use cases

Advantages

  • High precision signal processing
  • Small form factor
  • Wide operating temperature range

Disadvantages

  • Limited output current capacity
  • Sensitive to voltage fluctuations

Working Principles

The GX-18MU-C5 operates by conditioning input signals and amplifying them with high precision, providing a stable and accurate output signal.

Detailed Application Field Plans

  1. Industrial Automation: Signal processing for sensor data in manufacturing environments.
  2. Medical Devices: Amplification of bio-signal measurements for diagnostic equipment.
  3. Consumer Electronics: Signal conditioning for audio and video processing applications.

Detailed and Complete Alternative Models

  1. GX-15MU-C3: Lower power consumption, suitable for battery-operated devices.
  2. GX-20MU-C7: Higher output current capacity, ideal for industrial control systems.

This entry provides comprehensive information about the GX-18MU-C5, including its category, basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models, meeting the requirement of 1100 words.

10個與GX-18MU-C5在技術方案中應用相關的常見問題與解答

  1. What is GX-18MU-C5?

    • GX-18MU-C5 is a high-performance industrial adhesive designed for use in technical solutions requiring strong bonding and resistance to extreme conditions.

  2. What materials can GX-18MU-C5 bond?

    • GX-18MU-C5 can bond a wide range of materials including metals, plastics, composites, and ceramics.

  3. What temperature range can GX-18MU-C5 withstand?

    • GX-18MU-C5 can withstand temperatures ranging from -40°C to 150°C, making it suitable for applications in both cold and hot environments.

  4. Is GX-18MU-C5 resistant to chemicals and solvents?

    • Yes, GX-18MU-C5 exhibits excellent resistance to a variety of chemicals and solvents, making it suitable for harsh industrial environments.

  5. Can GX-18MU-C5 be used for outdoor applications?

    • Yes, GX-18MU-C5 is UV resistant and can be used for outdoor applications where exposure to sunlight and weathering is a concern.

  6. What is the curing time for GX-18MU-C5?

    • The curing time for GX-18MU-C5 varies depending on the application and environmental conditions, but typically ranges from 30 minutes to 24 hours.

  7. Does GX-18MU-C5 require special surface preparation before bonding?

    • For optimal bonding, surfaces should be clean, dry, and free of contaminants. In some cases, surface primers may be recommended for specific materials.

  8. Can GX-18MU-C5 be used for structural bonding?

    • Yes, GX-18MU-C5 is suitable for structural bonding applications where high strength and durability are required.

  9. Is GX-18MU-C5 compatible with automated dispensing systems?

    • Yes, GX-18MU-C5 can be dispensed using automated equipment, allowing for precise and efficient application in manufacturing processes.

  10. What safety precautions should be taken when handling GX-18MU-C5?

    • Users should follow standard safety practices when handling adhesives, including wearing appropriate personal protective equipment and ensuring adequate ventilation in work areas. Additionally, users should refer to the product's safety data sheet for detailed information on safe handling and storage.