ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
NSCT3904LT1G
詳情 數據表

NSCT3904LT1G

Product Overview

  • Category: Transistor
  • Use: Amplification and switching in electronic circuits
  • Characteristics: Small signal NPN bipolar junction transistor, low power dissipation, high current gain
  • Package: SOT-23
  • Essence: Small signal amplification and switching
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Maximum Collector-Base Voltage (VCB): 40V
  • Maximum Collector-Emitter Voltage (VCE): 40V
  • Maximum Emitter-Base Voltage (VEB): 5V
  • Continuous Collector Current (IC): 200mA
  • Power Dissipation (PD): 300mW
  • Transition Frequency (fT): 250MHz

Detailed Pin Configuration

  1. Emitter (E)
  2. Base (B)
  3. Collector (C)

Functional Features

  • High current gain
  • Low power dissipation
  • Fast switching speed

Advantages

  • Small size
  • Suitable for high-density circuit designs
  • Wide range of applications

Disadvantages

  • Limited power handling capability
  • Susceptible to thermal runaway in some configurations

Working Principles

The NSCT3904LT1G operates as a small signal NPN bipolar junction transistor. When a small current flows into the base terminal, it controls a much larger current flowing between the collector and emitter terminals, allowing for amplification and switching functions in electronic circuits.

Detailed Application Field Plans

  1. Audio amplification circuits
  2. Signal amplification in sensor interfaces
  3. Switching applications in logic circuits
  4. Oscillator circuits

Detailed and Complete Alternative Models

  • BC547
  • 2N3904
  • 2SC945

This comprehensive entry provides an in-depth understanding of the NSCT3904LT1G, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10個與NSCT3904LT1G在技術方案中應用相關的常見問題與解答

  1. What is NSCT3904LT1G?

    • NSCT3904LT1G is a general-purpose NPN bipolar junction transistor (BJT) commonly used for amplification and switching applications.

  2. What are the typical applications of NSCT3904LT1G?

    • NSCT3904LT1G is commonly used in audio amplifiers, signal processing circuits, voltage regulators, and motor control circuits.

  3. What are the key electrical characteristics of NSCT3904LT1G?

    • The key electrical characteristics include a maximum collector current of 200mA, a maximum collector-emitter voltage of 40V, and a DC current gain (hFE) ranging from 100 to 300.

  4. How do I select the appropriate biasing and operating conditions for NSCT3904LT1G?

    • The appropriate biasing and operating conditions can be determined based on the specific application requirements, taking into account factors such as desired gain, frequency response, and power dissipation.

  5. What are the thermal considerations when using NSCT3904LT1G in a technical solution?

    • Thermal considerations include ensuring proper heat sinking and managing the junction temperature within the specified limits to maintain device reliability and performance.

  6. Can NSCT3904LT1G be used in high-frequency applications?

    • NSCT3904LT1G can be used in moderate-frequency applications, but for high-frequency applications, careful consideration of parasitic capacitances and other factors is necessary.

  7. What are the recommended soldering and handling practices for NSCT3904LT1G?

    • Recommended practices include using proper ESD precautions, following the manufacturer's soldering guidelines, and avoiding excessive mechanical stress during handling.

  8. How does NSCT3904LT1G compare to other transistors in similar applications?

    • NSCT3904LT1G offers a good balance of performance, cost, and availability compared to other transistors in its class, making it a popular choice for many applications.

  9. Are there any common failure modes or reliability concerns associated with NSCT3904LT1G?

    • Common failure modes may include thermal overstress, voltage breakdown, and ESD damage, so proper design and operating practices should be followed to ensure reliability.

  10. Where can I find detailed application notes and reference designs for using NSCT3904LT1G in technical solutions?

    • Detailed application notes and reference designs can often be found in the manufacturer's datasheets, application guides, and online technical resources. Additionally, consulting with experienced engineers and designers can provide valuable insights into best practices for utilizing NSCT3904LT1G effectively.