Category: Integrated Circuit (IC)
Use: The NLV74HC573ADTR2G is a high-speed octal D-type flip-flop with 3-state outputs. It is designed for general-purpose storage applications in digital systems.
Characteristics: - High-speed operation - 3-state outputs for bus-oriented applications - Wide operating voltage range - Low power consumption - Schmitt-trigger action on all inputs
Package: TSSOP-20
Essence: The NLV74HC573ADTR2G is an essential component in digital systems that require reliable and efficient storage of data.
Packaging/Quantity: The NLV74HC573ADTR2G is typically packaged in reels, with 2500 units per reel.
The NLV74HC573ADTR2G has a total of 20 pins. The pin configuration is as follows:
+---+--+---+
OE1 |1 +--+ 20| VCC
D0 |2 19| D7
D1 |3 18| D6
D2 |4 17| D5
D3 |5 16| D4
D4 |6 15| GND
D5 |7 14| Q4
D6 |8 13| Q3
D7 |9 12| Q2
GND |10 11| Q1
+----------+
Advantages: - High-speed operation enables fast data processing. - 3-state outputs facilitate efficient bus sharing. - Wide operating voltage range enhances compatibility. - Low power consumption reduces energy costs. - Schmitt-trigger action improves noise immunity.
Disadvantages: - Limited number of flip-flops (8) in a single package. - May require additional components for specific applications.
The NLV74HC573ADTR2G operates based on the principles of flip-flops. It stores binary information in its internal memory cells and can retain this information until it is updated. The device uses clock signals to synchronize the storage and retrieval of data. When the clock signal transitions, the input data is captured and stored in the flip-flop's memory. The stored data can then be accessed through the output pins.
The NLV74HC573ADTR2G finds applications in various digital systems, including but not limited to: - Microcontrollers - Data communication systems - Memory modules - Industrial automation - Automotive electronics
Some alternative models that offer similar functionality to the NLV74HC573ADTR2G include: - SN74HC573N - MC74HC573AN - CD74HC573E - 74HCT573
These models are compatible replacements and can be used interchangeably in most applications.
Word count: 411
Sure! Here are 10 common questions and answers related to the application of NLV74HC573ADTR2G in technical solutions:
Q: What is NLV74HC573ADTR2G? A: NLV74HC573ADTR2G is a high-speed octal D-type flip-flop with 3-state outputs, commonly used in digital logic circuits.
Q: What is the operating voltage range for NLV74HC573ADTR2G? A: The operating voltage range for NLV74HC573ADTR2G is typically between 2V and 6V.
Q: What is the maximum output current that NLV74HC573ADTR2G can handle? A: NLV74HC573ADTR2G can handle a maximum output current of 6mA.
Q: Can NLV74HC573ADTR2G be used in both parallel and serial data transfer applications? A: Yes, NLV74HC573ADTR2G can be used in both parallel and serial data transfer applications.
Q: What is the typical propagation delay of NLV74HC573ADTR2G? A: The typical propagation delay of NLV74HC573ADTR2G is around 11ns.
Q: Is NLV74HC573ADTR2G compatible with TTL logic levels? A: Yes, NLV74HC573ADTR2G is compatible with TTL logic levels.
Q: Can NLV74HC573ADTR2G be used in bidirectional data bus applications? A: No, NLV74HC573ADTR2G is not designed for bidirectional data bus applications.
Q: What is the maximum operating frequency of NLV74HC573ADTR2G? A: The maximum operating frequency of NLV74HC573ADTR2G is typically around 100MHz.
Q: Does NLV74HC573ADTR2G have built-in protection against electrostatic discharge (ESD)? A: Yes, NLV74HC573ADTR2G has built-in ESD protection.
Q: Can NLV74HC573ADTR2G be used in automotive applications? A: Yes, NLV74HC573ADTR2G is suitable for automotive applications and meets the necessary standards.
Please note that these answers are general and may vary depending on specific datasheet specifications and application requirements.