ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MPSW92RLRAG
詳情 數據表

MPSW92RLRAG

Product Overview

  • Category: Transistor
  • Use: Amplification and switching of electronic signals
  • Characteristics: High gain, low noise, and high frequency performance
  • Package: TO-92
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Available in reels of 2000 units

Specifications

  • Type: NPN
  • Collector-Emitter Voltage (VCEO): 300V
  • Collector-Base Voltage (VCBO): 300V
  • Emitter-Base Voltage (VEBO): 5V
  • Collector Current (IC): 500mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 250MHz

Detailed Pin Configuration

  1. Collector (C)
  2. Base (B)
  3. Emitter (E)

Functional Features

  • High voltage capability
  • Low leakage current
  • Fast switching speed

Advantages and Disadvantages

  • Advantages:
    • Suitable for high voltage applications
    • Low noise amplification
    • Wide frequency range
  • Disadvantages:
    • Limited power dissipation
    • Sensitive to temperature variations

Working Principles

The MPSW92RLRAG operates based on the principles of bipolar junction transistors, utilizing the flow of charge carriers to amplify or switch electronic signals.

Detailed Application Field Plans

  • Audio amplification circuits
  • RF signal amplification
  • Switching circuits

Detailed and Complete Alternative Models

  • 2N3904
  • BC547
  • 2N2222

This comprehensive entry provides a detailed overview of the MPSW92RLRAG transistor, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

10個與MPSW92RLRAG在技術方案中應用相關的常見問題與解答

  1. What is MPSW92RLRAG?

    • MPSW92RLRAG is a high-voltage PNP bipolar transistor designed for use in general-purpose amplifier and switching applications.

  2. What are the key features of MPSW92RLRAG?

    • The key features of MPSW92RLRAG include a high voltage rating, low saturation voltage, and high current gain.

  3. In what technical solutions can MPSW92RLRAG be used?

    • MPSW92RLRAG can be used in various technical solutions such as audio amplifiers, voltage regulators, relay drivers, and high-side load switches.

  4. What is the maximum voltage rating of MPSW92RLRAG?

    • The maximum voltage rating of MPSW92RLRAG is typically around 300 volts.

  5. What is the typical current gain of MPSW92RLRAG?

    • The typical current gain of MPSW92RLRAG is around 100 to 300.

  6. How does MPSW92RLRAG perform in high-voltage applications?

    • MPSW92RLRAG performs well in high-voltage applications due to its high voltage rating and low saturation voltage.

  7. Can MPSW92RLRAG be used in audio amplifier circuits?

    • Yes, MPSW92RLRAG is suitable for use in audio amplifier circuits due to its high voltage rating and low saturation voltage.

  8. What are the recommended operating conditions for MPSW92RLRAG?

    • The recommended operating conditions for MPSW92RLRAG include a collector current of up to 500mA and a collector-emitter voltage of up to 300 volts.

  9. Are there any specific thermal considerations for using MPSW92RLRAG?

    • It is important to consider proper heat sinking for MPSW92RLRAG when operating at high currents or in high ambient temperature environments.

  10. Where can I find detailed technical specifications for MPSW92RLRAG?

    • Detailed technical specifications for MPSW92RLRAG can be found in the datasheet provided by the manufacturer or distributor.