ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MPF4393RLRPG
詳情 數據表

MPF4393RLRPG

Introduction

The MPF4393RLRPG is a field-effect transistor (FET) belonging to the category of electronic components. This device is commonly used in various electronic circuits for amplification, switching, and other applications due to its unique characteristics and performance.

Basic Information Overview

  • Category: Electronic Component
  • Use: Amplification, Switching
  • Characteristics: High input impedance, low output impedance, low noise, high gain
  • Package: TO-92
  • Essence: Field-Effect Transistor
  • Packaging/Quantity: Typically available in reels or tubes containing multiple units

Specifications

  • Maximum Drain-Source Voltage: 30V
  • Maximum Gate-Source Voltage: ±20V
  • Continuous Drain Current: 0.35A
  • Power Dissipation: 625mW
  • Operating Temperature Range: -55°C to 150°C

Detailed Pin Configuration

The MPF4393RLRPG features a standard TO-92 package with three leads: 1. Gate (G) 2. Drain (D) 3. Source (S)

Functional Features

  • High input impedance allows for minimal loading of preceding stages
  • Low output impedance enables driving of loads with minimal signal loss
  • Low noise characteristics make it suitable for sensitive signal processing applications
  • High gain facilitates signal amplification without significant distortion

Advantages and Disadvantages

Advantages

  • Versatile application in various electronic circuits
  • Reliable performance under specified operating conditions
  • Compact TO-92 package for easy integration into circuit designs

Disadvantages

  • Limited maximum drain-source voltage compared to some alternative models
  • Moderate continuous drain current may restrict use in high-power applications

Working Principles

The MPF4393RLRPG operates based on the principles of field-effect transistors, utilizing the control of electric fields within a semiconductor to modulate the flow of current between the drain and source terminals. By varying the voltage applied to the gate terminal, the conductivity between the drain and source can be controlled, allowing for amplification and switching functions.

Detailed Application Field Plans

The MPF4393RLRPG finds extensive use in the following application fields: - Audio Amplifiers - Signal Processing Circuits - Low-Power Switching Circuits - Oscillator Circuits - Sensor Interfaces

Detailed and Complete Alternative Models

For applications requiring similar functionality, alternative models to consider include: - 2N7000 - BS170 - J310 - BF256B - 2N5457

In conclusion, the MPF4393RLRPG offers a reliable and versatile solution for various electronic circuit designs, particularly those requiring amplification and switching capabilities within specified voltage and current limits.

[Word Count: 386]

10個與MPF4393RLRPG在技術方案中應用相關的常見問題與解答

  1. What is MPF4393RLRPG?

    • MPF4393RLRPG is a small-signal N-channel JFET transistor commonly used in electronic circuits for applications such as amplification and switching.

  2. What are the key specifications of MPF4393RLRPG?

    • The key specifications include a maximum drain-source voltage of 30V, a maximum gate-source voltage of 30V, and a maximum continuous drain current of 50mA.

  3. How can MPF4393RLRPG be used in amplifier circuits?

    • MPF4393RLRPG can be used as a voltage-controlled resistor in amplifier circuits, providing variable gain based on the input voltage.

  4. What are some common applications of MPF4393RLRPG in technical solutions?

    • MPF4393RLRPG is commonly used in audio preamplifiers, signal amplification circuits, and voltage-controlled switches.

  5. What are the typical operating conditions for MPF4393RLRPG?

    • The typical operating conditions include a maximum power dissipation of 350mW, a junction temperature range of -55°C to 150°C, and a storage temperature range of -55°C to 150°C.

  6. How does MPF4393RLRPG compare to other JFET transistors in terms of performance?

    • MPF4393RLRPG offers low noise and high input impedance, making it suitable for low-power, high-gain applications compared to other JFET transistors.

  7. Can MPF4393RLRPG be used in switching applications?

    • Yes, MPF4393RLRPG can be used as a voltage-controlled switch in electronic circuits due to its ability to modulate current flow based on the input voltage.

  8. What are the recommended circuit configurations for using MPF4393RLRPG in amplifier designs?

    • Common source and common drain configurations are commonly used for amplifier designs utilizing MPF4393RLRPG.

  9. Are there any specific considerations for biasing MPF4393RLRPG in a circuit?

    • Proper biasing is essential to ensure optimal performance, and careful attention should be paid to setting the appropriate quiescent operating point for the transistor.

  10. Where can I find detailed application notes and reference designs for using MPF4393RLRPG in technical solutions?

    • Detailed application notes and reference designs can often be found in the manufacturer's datasheet, as well as in technical literature and online resources related to JFET transistor applications.