ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MMBZ20VAWT1G
詳情 數據表

MMBZ20VAWT1G

Introduction

The MMBZ20VAWT1G is a zener diode that belongs to the category of semiconductor devices. This component is commonly used in electronic circuits for voltage regulation and protection against overvoltage conditions. The MMBZ20VAWT1G possesses specific characteristics, packaging, and quantity details that make it suitable for various applications.

Basic Information Overview

  • Category: Semiconductor device, specifically a zener diode
  • Use: Voltage regulation and overvoltage protection in electronic circuits
  • Characteristics: Precise voltage regulation, low leakage current, small form factor
  • Package: SOD-323 package type
  • Essence: Zener diode with a voltage rating of 20V
  • Packaging/Quantity: Available in tape and reel packaging, with quantities varying based on supplier and order size

Specifications

  • Voltage Rating: 20V
  • Power Dissipation: 225mW
  • Operating Temperature Range: -65°C to +150°C
  • Zener Voltage Tolerance: ±5%
  • Maximum Reverse Leakage Current: 100nA

Detailed Pin Configuration

The MMBZ20VAWT1G zener diode has a standard SOD-323 package with two pins. The pin configuration is as follows: - Pin 1: Anode - Pin 2: Cathode

Functional Features

The primary function of the MMBZ20VAWT1G zener diode is to maintain a constant voltage across its terminals, effectively regulating the voltage in electronic circuits. It achieves this by allowing current to flow in reverse bias when the applied voltage reaches the zener voltage.

Advantages and Disadvantages

Advantages

  • Precise voltage regulation
  • Small form factor
  • Low leakage current

Disadvantages

  • Limited power dissipation capability
  • Vulnerable to damage from excessive current or voltage spikes

Working Principles

The MMBZ20VAWT1G zener diode operates based on the principle of the zener effect. When the voltage across its terminals exceeds the zener voltage, the diode enters the breakdown region, allowing a controlled amount of current to flow in reverse bias. This characteristic enables the diode to regulate the voltage in electronic circuits.

Detailed Application Field Plans

The MMBZ20VAWT1G zener diode finds application in various electronic circuits, including: - Voltage regulators - Overvoltage protection circuits - Signal clamping circuits - Voltage reference circuits

Detailed and Complete Alternative Models

Some alternative models to the MMBZ20VAWT1G zener diode include: - BZX84C20LT1G - MMSZ5248BT1G - BZT52C20S-7-F

In conclusion, the MMBZ20VAWT1G zener diode is a crucial component in electronic circuits, providing precise voltage regulation and overvoltage protection. Its compact size and functional features make it suitable for a wide range of applications.

Word Count: 410

10個與MMBZ20VAWT1G在技術方案中應用相關的常見問題與解答

Sure, here are 10 common questions and answers related to the application of MMBZ20VAWT1G in technical solutions:

  1. What is MMBZ20VAWT1G?

    • MMBZ20VAWT1G is a Zener diode array designed for voltage regulation and ESD protection in various electronic circuits.

  2. What are the key features of MMBZ20VAWT1G?

    • The key features include a low leakage current, high ESD capability, and a small SOT-323 package for space-constrained applications.

  3. How can MMBZ20VAWT1G be used for voltage regulation?

    • MMBZ20VAWT1G can be connected in parallel with a load to regulate the voltage across the load within a specific range.

  4. In what types of applications is MMBZ20VAWT1G commonly used?

    • MMBZ20VAWT1G is commonly used in portable electronics, consumer electronics, and industrial control systems for voltage regulation and ESD protection.

  5. What is the maximum power dissipation of MMBZ20VAWT1G?

    • The maximum power dissipation is typically 225mW, making it suitable for low-power applications.

  6. How does MMBZ20VAWT1G provide ESD protection?

    • MMBZ20VAWT1G has a high ESD capability, which means it can safely divert electrostatic discharge away from sensitive components in a circuit.

  7. Can MMBZ20VAWT1G be used in automotive applications?

    • Yes, MMBZ20VAWT1G is AEC-Q101 qualified, making it suitable for use in automotive electronics.

  8. What is the operating temperature range of MMBZ20VAWT1G?

    • The operating temperature range is typically -55°C to 150°C, allowing for reliable performance in a wide range of environments.

  9. How should MMBZ20VAWT1G be mounted on a PCB?

    • MMBZ20VAWT1G should be mounted using appropriate soldering techniques, following the recommended footprint and soldering guidelines provided in the datasheet.

  10. Are there any application notes or reference designs available for using MMBZ20VAWT1G?

    • Yes, the manufacturer provides application notes and reference designs to assist engineers in implementing MMBZ20VAWT1G in their technical solutions.

I hope these questions and answers are helpful! Let me know if you need further assistance.