ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MMBTH10M3T5G
詳情 數據表

MMBTH10M3T5G

1. Introduction

The MMBTH10M3T5G is a high-performance NPN bipolar junction transistor (BJT) that belongs to the category of electronic components. This device is commonly used in various electronic circuits for amplification and switching applications due to its unique characteristics.

2. Basic Information Overview

  • Category: Electronic Component
  • Use: Amplification and Switching
  • Characteristics: High gain, low noise, small package size
  • Package: SOT-23
  • Essence: NPN BJT
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

3. Specifications

  • Collector-Base Voltage (VCBO): 40V
  • Collector-Emitter Voltage (VCEO): 40V
  • Emitter-Base Voltage (VEBO): 6V
  • Collector Current (IC): 600mA
  • Total Power Dissipation (PT): 225mW
  • Transition Frequency (fT): 250MHz
  • Operating Temperature Range: -55°C to 150°C

4. Detailed Pin Configuration

The MMBTH10M3T5G has three pins: - Pin 1: Emitter - Pin 2: Base - Pin 3: Collector

5. Functional Features

  • High current gain
  • Low saturation voltage
  • Fast switching speed
  • Low noise figure

6. Advantages and Disadvantages

Advantages

  • Small package size
  • High transition frequency
  • Low power dissipation

Disadvantages

  • Limited collector current compared to power transistors
  • Limited voltage ratings compared to power transistors

7. Working Principles

The MMBTH10M3T5G operates based on the principles of bipolar junction transistors, where the flow of current between the emitter and collector is controlled by the base current. It amplifies small input signals and can be used as a switch in electronic circuits.

8. Detailed Application Field Plans

The MMBTH10M3T5G is widely used in: - Audio amplifiers - Signal amplification circuits - Switching circuits - Oscillator circuits

9. Detailed and Complete Alternative Models

Some alternative models to the MMBTH10M3T5G include: - 2N3904 - BC547 - 2SC945 - PN2222A

In conclusion, the MMBTH10M3T5G is a versatile NPN BJT with excellent characteristics suitable for various electronic applications, making it a popular choice among circuit designers and hobbyists.

[Word Count: 346]

10個與MMBTH10M3T5G在技術方案中應用相關的常見問題與解答

  1. What is MMBTH10M3T5G?

    • MMBTH10M3T5G is a high-frequency, low-power NPN bipolar junction transistor (BJT) commonly used in RF and microwave applications.

  2. What are the typical applications of MMBTH10M3T5G?

    • MMBTH10M3T5G is commonly used in wireless communication systems, RF amplifiers, oscillators, and other high-frequency electronic circuits.

  3. What are the key electrical characteristics of MMBTH10M3T5G?

    • The MMBTH10M3T5G transistor typically has a maximum collector current of 200mA, a maximum power dissipation of 300mW, and a transition frequency (fT) of 4GHz.

  4. How does MMBTH10M3T5G compare to other transistors in its class?

    • Compared to similar transistors, MMBTH10M3T5G offers a good balance of high frequency performance, low power consumption, and compact size, making it suitable for various RF applications.

  5. What are the recommended operating conditions for MMBTH10M3T5G?

    • MMBTH10M3T5G is typically operated at a collector-emitter voltage (VCE) of 20V and a collector current (IC) of 50mA.

  6. Can MMBTH10M3T5G be used in amplifier designs?

    • Yes, MMBTH10M3T5G is commonly used in RF amplifier designs due to its high-frequency capabilities and low power requirements.

  7. Are there any specific layout considerations when using MMBTH10M3T5G in a circuit?

    • It is important to minimize parasitic capacitance and inductance in the layout to ensure optimal high-frequency performance of MMBTH10M3T5G-based circuits.

  8. What are the thermal considerations for MMBTH10M3T5G in high-power applications?

    • In high-power applications, proper heat sinking and thermal management should be considered to ensure the MMBTH10M3T5G operates within its specified temperature limits.

  9. Can MMBTH10M3T5G be used in low-noise amplifier (LNA) designs?

    • Yes, MMBTH10M3T5G can be utilized in LNA designs, especially in applications where low power consumption and high frequency performance are crucial.

  10. Where can I find detailed datasheets and application notes for MMBTH10M3T5G?

    • Datasheets and application notes for MMBTH10M3T5G can typically be found on the manufacturer's website or through authorized distributors.