ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MMBT2222ATT3G
詳情 數據表

MMBT2222ATT3G

Introduction

The MMBT2222ATT3G is a widely used NPN small signal transistor belonging to the category of electronic components. This versatile transistor finds applications in various electronic circuits due to its characteristics and performance.

Basic Information Overview

  • Category: Electronic Components
  • Use: Amplification, Switching
  • Characteristics: Small size, low power consumption, high gain
  • Package: SOT-23
  • Essence: Small signal amplification
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Maximum Collector-Base Voltage (Vcb): 75V
  • Maximum Collector-Emitter Voltage (Vce): 40V
  • Maximum Emitter-Base Voltage (Veb): 6V
  • Continuous Collector Current (Ic): 600mA
  • Total Power Dissipation (Pd): 225mW
  • Transition Frequency (ft): 250MHz

Detailed Pin Configuration

The MMBT2222ATT3G transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High current gain
  • Low noise
  • Fast switching speed
  • Wide operating frequency range

Advantages and Disadvantages

Advantages

  • Small size
  • Versatile applications
  • Low power consumption
  • High gain

Disadvantages

  • Limited power handling capability
  • Susceptible to thermal runaway if not properly biased

Working Principles

The MMBT2222ATT3G operates as a bipolar junction transistor (BJT), where the flow of current between the collector and emitter is controlled by the current flowing into the base terminal. It amplifies small signals and can also be used as a switch in electronic circuits.

Detailed Application Field Plans

The MMBT2222ATT3G transistor finds extensive use in the following applications: - Audio amplifiers - Signal amplification in sensor circuits - Switching applications in digital logic circuits - Oscillator circuits

Detailed and Complete Alternative Models

Some alternative models to the MMBT2222ATT3G include: - 2N2222A - BC547 - PN2222A - 2N3904

In conclusion, the MMBT2222ATT3G transistor is a fundamental component in electronic circuits, offering high gain and versatility in various applications.

[Word Count: 311]

10個與MMBT2222ATT3G在技術方案中應用相關的常見問題與解答

  1. What is the MMBT2222ATT3G transistor used for?

    • The MMBT2222ATT3G is a general-purpose NPN bipolar junction transistor commonly used for amplification and switching applications in electronic circuits.

  2. What are the key specifications of the MMBT2222ATT3G transistor?

    • The MMBT2222ATT3G transistor typically has a maximum collector current of 600mA, a maximum collector-emitter voltage of 40V, and a maximum power dissipation of 225mW.

  3. How can I use the MMBT2222ATT3G transistor as a switch?

    • The MMBT2222ATT3G can be used as a switch by biasing it into either cutoff or saturation regions to control the flow of current through a load.

  4. What are some common circuit configurations using the MMBT2222ATT3G transistor?

    • Common circuit configurations include common emitter, common base, and common collector configurations for various amplification and switching purposes.

  5. What are the typical applications of the MMBT2222ATT3G transistor?

    • The MMBT2222ATT3G transistor is commonly used in audio amplifiers, signal amplification, LED drivers, motor control, and various digital logic circuits.

  6. How do I calculate the base resistor value for driving the MMBT2222ATT3G transistor?

    • The base resistor value can be calculated using the desired base current and the current gain (hFE) of the transistor according to Ohm's law.

  7. What are the thermal considerations when using the MMBT2222ATT3G transistor?

    • It is important to consider the power dissipation and thermal resistance of the transistor to ensure proper heat sinking and prevent overheating.

  8. Can the MMBT2222ATT3G transistor be used in high-frequency applications?

    • While the MMBT2222ATT3G has limitations at higher frequencies due to its transition frequency, it can still be used in moderate frequency applications.

  9. What are the differences between MMBT2222A and MMBT2222ATT3G transistors?

    • The MMBT2222ATT3G is a surface mount version of the MMBT2222A, with similar electrical characteristics but different package types.

  10. Where can I find detailed information about the MMBT2222ATT3G transistor?

    • Detailed information about the MMBT2222ATT3G transistor can be found in the datasheet provided by the manufacturer, which includes electrical characteristics, application notes, and recommended operating conditions.