MC100EL52DTR2G

Product Overview

• Category: Integrated Circuit
• Use: Logic Gate
• Characteristics: High-speed, Differential ECL (Emitter-Coupled Logic) Gate
• Package: SOIC-8
• Essence: Provides high-speed logic functions for digital systems
• Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

• Supply Voltage Range: -4.2V to -5.7V
• Input Voltage Range: -3.0V to -5.7V
• Output Voltage Range: -3.0V to -5.7V
• Operating Temperature Range: -40°C to +85°C
• Propagation Delay: 1.6 ns (typical)
• Maximum Frequency: 2.5 GHz

Detailed Pin Configuration

The MC100EL52DTR2G has a total of 8 pins arranged as follows:

1. VCC - Power supply voltage
2. Q - Output
3. D - Differential data input
4. /Q - Complementary output
5. /D - Complementary differential data input
6. GND - Ground
7. VEE - Negative power supply voltage
8. /CLK - Complementary clock input

Functional Features

• High-speed operation: The MC100EL52DTR2G is designed to operate at very high frequencies, making it suitable for applications requiring fast signal processing.
• Differential inputs: The device accepts differential data inputs, which provide better noise immunity and common-mode rejection compared to single-ended inputs.
• Complementary outputs: The chip provides both normal and complementary outputs, allowing for flexible signal routing and compatibility with various system architectures.

Advantages and Disadvantages

Advantages: - High-speed operation enables efficient signal processing in demanding applications. - Differential inputs provide improved noise immunity and signal integrity. - Complementary outputs offer flexibility in system design.

Disadvantages: - Requires negative power supply voltage, which may add complexity to the power management circuitry. - Limited availability of alternative models with similar specifications.

Working Principles

The MC100EL52DTR2G is based on ECL technology, which utilizes differential signaling and current-mode logic. The device operates by comparing the voltage levels of the differential input signals and producing corresponding output levels based on the logic function implemented. The high-speed operation is achieved through the use of low impedance current switching.

Detailed Application Field Plans

The MC100EL52DTR2G is commonly used in applications that require high-speed digital signal processing, such as:

1. Telecommunications: The chip can be utilized in high-speed data transmission systems, where it helps maintain signal integrity and minimize data errors.
2. Networking: It finds application in network switches and routers, enabling efficient packet routing and switching at high speeds.
3. Test and Measurement: The device is suitable for test equipment that requires precise timing and fast data processing capabilities.
4. Data Centers: It can be employed in data center infrastructure, facilitating high-speed data transfer and processing within server clusters.

Detailed and Complete Alternative Models

While the MC100EL52DTR2G is a highly capable logic gate, there are alternative models available with similar specifications. Some notable alternatives include:

1. MC100EL52DG: Similar characteristics and package, but with different pin configuration.
2. MC100EL52DR2G: Same characteristics and pin configuration, but available in a different package (SOIC-16).
3. MC100EL52DTG: Similar characteristics and pin configuration, but available in a different package (TSSOP-8).

These alternative models provide options for designers based on their specific requirements and preferences.

Word count: 438 words