ON Semiconductor
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
ADM1021ARQ
詳情 數據表

ADM1021ARQ

Product Overview

Category: Integrated Circuit (IC)

Use: Temperature Sensor and Voltage Monitor

Characteristics: - Monitors temperature and voltage levels in electronic systems - Provides accurate measurements for system monitoring and control - Designed for use in various applications, including computer systems, industrial equipment, and automotive electronics

Package: 16-pin QSOP (Quarter Small Outline Package)

Essence: The ADM1021ARQ is a versatile IC that combines temperature sensing and voltage monitoring capabilities in a compact package. It offers precise measurements and reliable performance for efficient system management.

Packaging/Quantity: The ADM1021ARQ is available in tape and reel packaging, with 250 units per reel.

Specifications

  • Temperature Measurement Range: -40°C to +125°C
  • Voltage Monitoring Range: 0V to 5V
  • Supply Voltage: 3V to 5.5V
  • Resolution: 0.0625°C
  • Accuracy: ±2°C (temperature), ±2% (voltage)
  • Interface: I2C/SMBus compatible

Pin Configuration

The ADM1021ARQ features a 16-pin QSOP package with the following pin configuration:

  1. VCC: Supply Voltage Input
  2. GND: Ground
  3. ALERT: Open-drain Output for Alert Signal
  4. SDA: Serial Data Input/Output (I2C/SMBus)
  5. SCL: Serial Clock Input (I2C/SMBus)
  6. VDD: Digital Supply Voltage Input
  7. VSS: Digital Ground
  8. D+/-: Differential Analog Inputs for Remote Diode Temperature Sensing
  9. VREF: Reference Voltage Output
  10. VIN: Voltage Input for Monitoring
  11. VOUT: Voltage Output for Monitoring
  12. NC: No Connection
  13. NC: No Connection
  14. NC: No Connection
  15. NC: No Connection
  16. NC: No Connection

Functional Features

  1. Temperature Sensing: The ADM1021ARQ accurately measures temperature using remote diode sensing technology, allowing for precise monitoring and control of system temperature.
  2. Voltage Monitoring: It provides voltage monitoring capabilities to ensure stable operation of electronic systems by detecting overvoltage or undervoltage conditions.
  3. Alert Function: The open-drain ALERT pin can be configured to generate an interrupt signal when certain temperature or voltage thresholds are exceeded, enabling timely system response.
  4. I2C/SMBus Interface: The IC supports the widely used I2C/SMBus communication protocol, allowing easy integration into various digital systems.

Advantages and Disadvantages

Advantages: - Accurate temperature measurements - Wide temperature range - Versatile voltage monitoring - Compact package size - Compatible with I2C/SMBus interface

Disadvantages: - Limited resolution for temperature measurements - Slightly higher cost compared to some alternative models

Working Principles

The ADM1021ARQ utilizes a combination of analog and digital circuitry to measure temperature and monitor voltage levels. It employs remote diode sensing to accurately measure temperature, while voltage monitoring is achieved through precise analog-to-digital conversion. The IC communicates with the system controller via the I2C/SMBus interface, providing real-time temperature and voltage data for system management.

Application Field Plans

The ADM1021ARQ finds applications in various fields, including:

  1. Computer Systems:

    • Server farms
    • Desktop computers
    • Laptops

  2. Industrial Equipment:

    • Power supplies
    • Motor drives
    • HVAC systems

  3. Automotive Electronics:

    • Engine control units
    • Battery management systems
    • Climate control systems

Alternative Models

  1. LM75A: Digital Temperature Sensor and Thermal Watchdog
  2. MAX6657: Multichannel Remote/Local Temperature Sensors with Overtemperature Alarms
  3. TMP102: Low-Power Digital Temperature Sensor with I2C Interface
  4. MCP9808: High Accuracy I2C Temperature Sensor

These alternative models offer similar temperature sensing and voltage monitoring capabilities, providing options for different system requirements.

In conclusion, the ADM1021ARQ is a versatile IC that combines temperature sensing and voltage monitoring functionalities. With its accurate measurements, compact package, and compatibility with the I2C/SMBus interface, it is suitable for various applications in computer systems, industrial equipment, and automotive electronics.

10個與ADM1021ARQ在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of ADM1021ARQ in technical solutions:

1. What is ADM1021ARQ? ADM1021ARQ is a temperature sensor and voltage monitor integrated circuit (IC) that is commonly used in technical solutions for monitoring and controlling temperature and voltage levels.

2. How does ADM1021ARQ measure temperature? ADM1021ARQ uses an on-chip temperature sensor to measure the ambient temperature. It converts the analog temperature reading into a digital value that can be read by a microcontroller or other digital device.

3. Can ADM1021ARQ measure multiple temperatures simultaneously? No, ADM1021ARQ is a single-channel temperature sensor, meaning it can only measure the temperature at one specific location.

4. What is the voltage monitoring capability of ADM1021ARQ? ADM1021ARQ can monitor the supply voltage level and provide alerts if it falls below or exceeds certain thresholds. This feature helps protect the system from voltage-related issues.

5. How accurate is the temperature measurement of ADM1021ARQ? ADM1021ARQ has a typical accuracy of ±2°C, which means the measured temperature can deviate up to 2 degrees Celsius from the actual temperature.

6. Can ADM1021ARQ be used in battery-powered applications? Yes, ADM1021ARQ can operate with a wide supply voltage range, making it suitable for battery-powered applications.

7. Does ADM1021ARQ have any built-in protection features? Yes, ADM1021ARQ has built-in over-temperature and over-voltage protection features. It can generate alerts or take corrective actions when these limits are exceeded.

8. What communication interface does ADM1021ARQ support? ADM1021ARQ supports the I2C (Inter-Integrated Circuit) communication interface, which allows it to communicate with other devices in the system.

9. Can ADM1021ARQ be used in industrial applications? Yes, ADM1021ARQ is suitable for industrial applications as it can operate in a wide temperature range and has features like over-temperature protection.

10. Are there any evaluation boards or development kits available for ADM1021ARQ? Yes, Analog Devices provides evaluation boards and development kits for ADM1021ARQ, which can help developers quickly prototype and test their solutions using this IC.

Please note that these answers are general and may vary depending on the specific implementation and requirements of the technical solution.