NXP USA Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MPXV2010DP
詳情 數據表

MPXV2010DP

Introduction

The MPXV2010DP is a pressure sensor belonging to the category of integrated silicon pressure sensors. It is commonly used for measuring absolute pressure in various applications. This entry provides an overview of the product, including its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Basic Information Overview

  • Category: Integrated Silicon Pressure Sensor
  • Use: Measurement of Absolute Pressure
  • Characteristics: High Accuracy, Small Size, Low Power Consumption
  • Package: Dual Inline Package (DIP)
  • Essence: Accurate Pressure Sensing
  • Packaging/Quantity: Typically Packaged Individually

Specifications

  • Pressure Range: 0 to 10 kPa
  • Supply Voltage: 4.75 to 5.25 V
  • Output Type: Analog
  • Operating Temperature: -40°C to 125°C
  • Accuracy: ±1.5% Full Scale

Detailed Pin Configuration

The MPXV2010DP has a total of 6 pins: 1. Vout - Analog Output 2. Vss - Ground 3. Vdd - Supply Voltage 4. N/C - No Connection 5. N/C - No Connection 6. N/C - No Connection

Functional Features

  • High Accuracy: Provides precise pressure measurements
  • Temperature Compensation: Maintains accuracy across temperature variations
  • Small Size: Enables integration into compact designs
  • Low Power Consumption: Suitable for battery-powered applications

Advantages and Disadvantages

Advantages

  • Accurate pressure sensing
  • Compact size
  • Low power consumption

Disadvantages

  • Limited pressure range
  • Analog output may require additional signal conditioning

Working Principles

The MPXV2010DP utilizes a piezoresistive sensing element to detect changes in pressure. When pressure is applied, the resistance of the sensing element changes, resulting in a corresponding change in the output voltage. This voltage is then converted into a digital or analog signal for further processing.

Detailed Application Field Plans

The MPXV2010DP is suitable for various applications, including: - Medical Devices: Blood pressure monitors, respiratory equipment - Automotive: Engine control systems, tire pressure monitoring - Industrial Automation: HVAC systems, pneumatic controls - Consumer Electronics: Smartphones, wearables

Detailed and Complete Alternative Models

Some alternative models to the MPXV2010DP include: - MPXV5010DP: Higher pressure range - MPXV7002DP: Differential pressure measurement - MPX5700AP: Enhanced accuracy and temperature compensation

In conclusion, the MPXV2010DP is a versatile pressure sensor with high accuracy and small form factor, making it suitable for a wide range of applications. Its limitations in pressure range and analog output requirements should be considered when selecting a sensor for specific use cases.

[Word Count: 411]

10個與MPXV2010DP在技術方案中應用相關的常見問題與解答

  1. What is the MPXV2010DP sensor used for?

    • The MPXV2010DP sensor is commonly used to measure differential pressure in various technical solutions.

  2. What is the operating voltage range of the MPXV2010DP sensor?

    • The operating voltage range of the MPXV2010DP sensor is typically 4.75V to 5.25V.

  3. How does the MPXV2010DP sensor communicate with microcontrollers or other devices?

    • The MPXV2010DP sensor usually communicates using analog voltage output, making it compatible with most microcontrollers and data acquisition systems.

  4. What is the pressure range that the MPXV2010DP sensor can measure?

    • The MPXV2010DP sensor can measure differential pressure within a range of ±10 kPa.

  5. Can the MPXV2010DP sensor be used in medical devices?

    • Yes, the MPXV2010DP sensor can be utilized in medical devices such as ventilators and respiratory equipment to monitor air pressure differentials.

  6. Is the MPXV2010DP sensor suitable for automotive applications?

    • Absolutely, the MPXV2010DP sensor is commonly employed in automotive applications for measuring air flow and pressure differentials in engine management systems.

  7. What is the accuracy of the MPXV2010DP sensor?

    • The MPXV2010DP sensor typically has an accuracy of around ±1.5% full-scale span over the specified temperature range.

  8. Can the MPXV2010DP sensor be used in industrial automation systems?

    • Yes, the MPXV2010DP sensor is well-suited for industrial automation applications, including HVAC systems, pneumatic controls, and hydraulic systems.

  9. Does the MPXV2010DP sensor require calibration before use?

    • It is recommended to calibrate the MPXV2010DP sensor before use to ensure accurate measurements, especially if high precision is required.

  10. Are there any special considerations for integrating the MPXV2010DP sensor into a technical solution?

    • When integrating the MPXV2010DP sensor, it's important to consider proper mounting, protection from environmental factors, and appropriate filtering of the output signal to minimize noise interference.