NXP USA Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MM908E625ACPEK
詳情 數據表

MM908E625ACPEK

Product Overview

  • Category: Integrated Circuit (IC)
  • Use: Automotive Electronics
  • Characteristics: High-performance microcontroller for automotive applications
  • Package: Plastic Encapsulated Microcircuit (PEM)
  • Essence: Advanced control and monitoring capabilities for automotive systems
  • Packaging/Quantity: Available in tape and reel packaging, quantity varies based on customer requirements

Specifications

  • Microcontroller Type: 8-bit
  • Operating Voltage: 2.7V to 5.5V
  • Clock Frequency: Up to 20 MHz
  • Program Memory Size: 64 KB Flash
  • Data Memory Size: 2 KB RAM
  • Number of I/O Pins: 32
  • Communication Interfaces: SPI, LIN
  • Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The MM908E625ACPEK microcontroller has a total of 32 pins. The pin configuration is as follows:

  1. VDD: Power supply voltage input
  2. VSS: Ground reference
  3. RESET: Reset pin for initializing the microcontroller
  4. XTAL1: Crystal oscillator input
  5. XTAL2: Crystal oscillator output
  6. P0.0: General-purpose I/O pin
  7. P0.1: General-purpose I/O pin
  8. P0.2: General-purpose I/O pin
  9. P0.3: General-purpose I/O pin
  10. P0.4: General-purpose I/O pin
  11. P0.5: General-purpose I/O pin
  12. P0.6: General-purpose I/O pin
  13. P0.7: General-purpose I/O pin
  14. P1.0: General-purpose I/O pin
  15. P1.1: General-purpose I/O pin
  16. P1.2: General-purpose I/O pin
  17. P1.3: General-purpose I/O pin
  18. P1.4: General-purpose I/O pin
  19. P1.5: General-purpose I/O pin
  20. P1.6: General-purpose I/O pin
  21. P1.7: General-purpose I/O pin
  22. LIN: LIN communication interface pin
  23. SPI_MISO: SPI Master-In Slave-Out pin
  24. SPI_MOSI: SPI Master-Out Slave-In pin
  25. SPI_CLK: SPI Clock pin
  26. SPI_SS: SPI Slave Select pin
  27. VBAT: Backup battery voltage input
  28. ADC0: Analog-to-Digital Converter input channel 0
  29. ADC1: Analog-to-Digital Converter input channel 1
  30. ADC2: Analog-to-Digital Converter input channel 2
  31. ADC3: Analog-to-Digital Converter input channel 3
  32. ADC4: Analog-to-Digital Converter input channel 4

Functional Features

  • Advanced control and monitoring capabilities for automotive systems
  • Integrated LIN communication interface for in-vehicle networking
  • SPI interface for communication with external devices
  • On-chip analog-to-digital converter for sensor interfacing
  • Low power consumption for efficient operation in automotive applications
  • Robust design to withstand harsh environmental conditions

Advantages and Disadvantages

Advantages

  • High-performance microcontroller specifically designed for automotive electronics
  • Comprehensive set of features for control and monitoring applications
  • Support for LIN communication protocol simplifies in-vehicle networking
  • Flexible I/O configuration for interfacing with various sensors and actuators
  • Wide operating temperature range enables reliable operation in extreme conditions

Disadvantages

  • Limited program memory size compared to some other microcontrollers
  • Relatively small data memory capacity may restrict complex data processing capabilities

Working Principles

The MM908E625ACPEK microcontroller operates based on the principles of digital logic and embedded systems. It executes instructions stored in its program memory to control various automotive functions. The microcontroller communicates with external devices using the SPI interface and LIN communication protocol. It also incorporates an analog-to-digital converter for converting analog sensor signals into digital values. The microcontroller's low power consumption ensures efficient operation in automotive applications.

Detailed Application Field Plans

The MM908E625ACPEK microcontroller is widely used in automotive electronics for various applications, including:

  1. Engine Control Units (ECUs)
  2. Body Control Modules (BCMs)
  3. Climate Control Systems
  4. Anti-lock Braking Systems (ABS)
  5. Airbag Control Units (ACUs)
  6. Instrument Clusters
  7. Lighting Control Modules
  8. Powertrain Control Modules (PCMs)

Detailed and Complete Alternative Models

  1. MM908E624ACPEK: Similar microcontroller with slightly different pin configuration 2

10個與MM908E625ACPEK在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of MM908E625ACPEK in technical solutions:

  1. Q: What is MM908E625ACPEK? A: MM908E625ACPEK is a microcontroller unit (MCU) developed by NXP Semiconductors, specifically designed for automotive applications.

  2. Q: What are the key features of MM908E625ACPEK? A: Some key features of MM908E625ACPEK include an ARM Cortex-M0+ core, LIN transceiver, CAN controller, EEPROM, and various analog and digital peripherals.

  3. Q: What are the typical applications of MM908E625ACPEK? A: MM908E625ACPEK is commonly used in automotive systems such as body control modules, lighting control modules, HVAC systems, and other similar applications.

  4. Q: How does MM908E625ACPEK communicate with other devices? A: MM908E625ACPEK supports various communication protocols like LIN (Local Interconnect Network) and CAN (Controller Area Network) to interact with other devices in the system.

  5. Q: Can MM908E625ACPEK be programmed easily? A: Yes, MM908E625ACPEK can be programmed using standard development tools like Integrated Development Environments (IDEs) and programming/debugging interfaces.

  6. Q: Does MM908E625ACPEK have any built-in security features? A: Yes, MM908E625ACPEK provides several security features like secure boot, flash memory protection, and cryptographic accelerators to ensure data integrity and system security.

  7. Q: What is the power supply requirement for MM908E625ACPEK? A: MM908E625ACPEK typically operates at a voltage range of 3.0V to 5.5V, depending on the specific application requirements.

  8. Q: Can MM908E625ACPEK handle automotive temperature ranges? A: Yes, MM908E625ACPEK is designed to operate reliably in automotive temperature ranges, typically from -40°C to +125°C.

  9. Q: Are there any development resources available for MM908E625ACPEK? A: Yes, NXP provides comprehensive documentation, datasheets, reference manuals, and software development kits (SDKs) to aid in the development process.

  10. Q: Is MM908E625ACPEK suitable for high-volume production? A: Yes, MM908E625ACPEK is widely used in automotive industry and is well-suited for high-volume production due to its reliability, performance, and cost-effectiveness.

Please note that these answers are general and may vary based on specific implementation and requirements.