NXP USA Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MC33880PEG
詳情 數據表

MC33880PEG

Product Overview

  • Category: Integrated Circuit
  • Use: Motor Driver
  • Characteristics:
    • High voltage capability
    • Low quiescent current
    • Overtemperature protection
    • Short-circuit protection
  • Package: PEG (Power Enhanced Green)
  • Essence: Efficient motor control
  • Packaging/Quantity: Tape and Reel, 2500 units per reel

Specifications

  • Operating Voltage Range: 5.5V to 28V
  • Output Current: Up to 5A peak, 2.5A continuous
  • Operating Temperature Range: -40°C to +125°C
  • Control Interface: SPI (Serial Peripheral Interface)

Detailed Pin Configuration

The MC33880PEG has a total of 32 pins. The pin configuration is as follows:

  1. VDD
  2. GND
  3. IN1
  4. IN2
  5. IN3
  6. IN4
  7. OUT1
  8. OUT2
  9. OUT3
  10. OUT4
  11. SCLK
  12. SDI
  13. CS
  14. SDO
  15. FAULT
  16. DIAG
  17. VREF
  18. VCP
  19. VDS
  20. VREG
  21. VBB
  22. VSS
  23. VDD
  24. GND
  25. IN1
  26. IN2
  27. IN3
  28. IN4
  29. OUT1
  30. OUT2
  31. OUT3
  32. OUT4

Functional Features

  • Four half-bridge outputs for driving DC motors or other loads
  • SPI interface for easy control and configuration
  • Fault detection and reporting through the FAULT pin
  • Diagnostic output for monitoring the status of each half-bridge
  • Overtemperature and short-circuit protection for enhanced safety

Advantages and Disadvantages

Advantages: - High voltage capability allows driving a wide range of loads - Low quiescent current minimizes power consumption - Overtemperature and short-circuit protection ensure safe operation - SPI interface provides flexibility in control and configuration

Disadvantages: - Limited output current compared to some other motor drivers - Requires external components for proper operation

Working Principles

The MC33880PEG is designed to efficiently control DC motors or other loads. It utilizes four half-bridge outputs, allowing bidirectional control of the connected load. The integrated SPI interface enables easy communication with a microcontroller or other control devices.

The device incorporates overtemperature and short-circuit protection mechanisms to safeguard against potential damage. It continuously monitors the load conditions and reports any faults through the FAULT pin. Additionally, the DIAG pin provides diagnostic information about the status of each half-bridge.

Detailed Application Field Plans

The MC33880PEG finds applications in various fields where precise and efficient motor control is required. Some of the potential application areas include:

  1. Automotive industry: Used in electric power steering systems, HVAC blowers, and seat adjustment mechanisms.
  2. Robotics: Enables precise control of robot arm movements and locomotion.
  3. Industrial automation: Suitable for controlling conveyor belts, pumps, and actuators.
  4. Home appliances: Used in washing machines, dishwashers, and vacuum cleaners for motor control.

Detailed and Complete Alternative Models

  1. MC33926PNA: Similar motor driver IC with higher output current capability (up to 5A continuous).
  2. MC34932PNA: Motor driver IC with integrated H-Bridge and higher operating voltage range (up to 40V).

These alternative models offer different specifications and features, providing options for various motor control applications.

Word count: 446 words

10個與MC33880PEG在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of MC33880PEG in technical solutions:

  1. Q: What is MC33880PEG? A: MC33880PEG is a highly integrated H-Bridge power IC designed for automotive applications, specifically for driving DC motors.

  2. Q: What are the key features of MC33880PEG? A: The key features of MC33880PEG include overcurrent protection, thermal shutdown, under-voltage lockout, and diagnostic feedback.

  3. Q: What is the maximum voltage rating for MC33880PEG? A: MC33880PEG has a maximum voltage rating of 40V.

  4. Q: Can MC33880PEG handle bidirectional motor control? A: Yes, MC33880PEG supports bidirectional motor control, allowing both forward and reverse rotation of the motor.

  5. Q: How many output channels does MC33880PEG have? A: MC33880PEG has two independent output channels, making it suitable for controlling two separate motors or one motor with dual windings.

  6. Q: Does MC33880PEG require an external microcontroller for operation? A: No, MC33880PEG can be operated using simple logic inputs without the need for an external microcontroller.

  7. Q: What is the maximum current rating for each output channel of MC33880PEG? A: Each output channel of MC33880PEG can handle a maximum continuous current of 5A.

  8. Q: Is MC33880PEG suitable for high-temperature environments? A: Yes, MC33880PEG is designed to operate reliably in high-temperature environments and includes thermal shutdown protection to prevent overheating.

  9. Q: Can MC33880PEG be used in non-automotive applications? A: While MC33880PEG is primarily designed for automotive applications, it can also be used in other technical solutions that require motor control.

  10. Q: Are there any evaluation boards or reference designs available for MC33880PEG? A: Yes, NXP provides evaluation boards and reference designs for MC33880PEG, which can help developers quickly prototype and integrate the IC into their applications.

Please note that these answers are general and may vary depending on specific application requirements.