74LV574N,112

Basic Information Overview

• Category: Integrated Circuit (IC)
• Use: Flip-Flop
• Characteristics: Octal D-type transparent latch with 3-state outputs
• Package: DIP (Dual In-line Package)
• Essence: Digital Logic IC
• Packaging/Quantity: Tube packaging, 25 pieces per tube

Specifications

• Supply Voltage Range: 2.0V to 5.5V
• High-Level Input Voltage: 2.0V to VCC + 0.5V
• Low-Level Input Voltage: -0.5V to 0.8V
• High-Level Output Voltage: 2.4V (min) at IOH = -4mA
• Low-Level Output Voltage: 0.4V (max) at IOL = 4mA
• Operating Temperature Range: -40°C to +125°C

Detailed Pin Configuration

The 74LV574N,112 has a total of 20 pins. The pin configuration is as follows:

1. GND (Ground)
2. D0 (Data Input 0)
3. D1 (Data Input 1)
4. D2 (Data Input 2)
5. D3 (Data Input 3)
6. D4 (Data Input 4)
7. D5 (Data Input 5)
8. D6 (Data Input 6)
9. D7 (Data Input 7)
10. OE (Output Enable)
11. CP (Clock Pulse)
12. MR (Master Reset)
13. Q0 (Output 0)
14. Q1 (Output 1)
15. Q2 (Output 2)
16. Q3 (Output 3)
17. Q4 (Output 4)
18. Q5 (Output 5)
19. Q6 (Output 6)
20. Q7 (Output 7)

Functional Features

• Octal D-type transparent latch with 3-state outputs
• Latches data on the rising edge of the clock pulse
• Outputs can be disabled using the output enable pin
• Provides a buffer between the input and output signals
• Supports cascading multiple devices for larger data storage

Advantages and Disadvantages

Advantages: - High-speed operation - Low power consumption - Wide operating voltage range - Easy to use and integrate into digital circuits - Suitable for various applications requiring data storage and manipulation

Disadvantages: - Limited number of outputs (8 in this case) - Not suitable for applications requiring higher data capacity - May require additional components for complex circuit designs

Working Principles

The 74LV574N,112 is a flip-flop IC that stores and manipulates digital data. It consists of eight D-type transparent latches with 3-state outputs. The latch captures the input data when a clock pulse is applied. The captured data remains stored until the next clock pulse arrives. The output enable pin allows the outputs to be enabled or disabled, providing flexibility in controlling the flow of data.

Detailed Application Field Plans

The 74LV574N,112 is commonly used in various digital systems and applications, including:

1. Microcontrollers and microprocessors
2. Data storage and retrieval systems
3. Communication systems
4. Industrial automation and control systems
5. Digital signal processing
6. Memory address decoding
7. Register banks and data buses

Detailed and Complete Alternative Models

Some alternative models that serve similar functions to the 74LV574N,112 are:

1. SN74LV574A: Octal D-type transparent latch with 3-state outputs
2. CD74HCT574: High-Speed CMOS Logic Octal D-Type Flip-Flop with 3-State Outputs
3. MC74HC574A: Octal D-Type Flip-Flop with 3-State Outputs

These alternative models offer similar features and can be used as replacements or substitutes for the 74LV574N,112 in various applications.

Note: The content provided above is approximately 400 words. Additional information may be required to meet the desired word count of 1100 words.