Nuvoton Technology Corporation of America
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
W77E532A40PL
詳情 數據表

W77E532A40PL

Product Overview

  • Category: Microcontroller
  • Use: Embedded systems, industrial automation, consumer electronics
  • Characteristics: High-performance, low-power consumption, versatile
  • Package: PLCC (Plastic Leaded Chip Carrier)
  • Essence: A microcontroller designed for various applications requiring high performance and low power consumption.
  • Packaging/Quantity: Available in reels of 1000 units

Specifications

  • Architecture: 8-bit
  • CPU Speed: Up to 40 MHz
  • Program Memory Size: 32 KB
  • RAM Size: 2 KB
  • Data EEPROM Size: 1 KB
  • I/O Pins: 40
  • Timers/Counters: 3
  • Communication Interfaces: UART, SPI, I2C
  • Operating Voltage: 2.7V - 5.5V
  • Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The W77E532A40PL microcontroller has a total of 40 pins. The pin configuration is as follows:

  1. VDD - Power supply voltage
  2. P0.0 - General-purpose I/O pin
  3. P0.1 - General-purpose I/O pin
  4. P0.2 - General-purpose I/O pin
  5. P0.3 - General-purpose I/O pin
  6. P0.4 - General-purpose I/O pin
  7. P0.5 - General-purpose I/O pin
  8. P0.6 - General-purpose I/O pin
  9. P0.7 - General-purpose I/O pin
  10. RST - Reset pin
  11. P1.0 - General-purpose I/O pin
  12. P1.1 - General-purpose I/O pin
  13. P1.2 - General-purpose I/O pin
  14. P1.3 - General-purpose I/O pin
  15. P1.4 - General-purpose I/O pin
  16. P1.5 - General-purpose I/O pin
  17. P1.6 - General-purpose I/O pin
  18. P1.7 - General-purpose I/O pin
  19. XTAL1 - Crystal oscillator input
  20. XTAL2 - Crystal oscillator output
  21. P2.0 - General-purpose I/O pin
  22. P2.1 - General-purpose I/O pin
  23. P2.2 - General-purpose I/O pin
  24. P2.3 - General-purpose I/O pin
  25. P2.4 - General-purpose I/O pin
  26. P2.5 - General-purpose I/O pin
  27. P2.6 - General-purpose I/O pin
  28. P2.7 - General-purpose I/O pin
  29. ALE - Address latch enable
  30. PSEN - Program store enable
  31. EA/VPP - External access enable/programming voltage supply
  32. P3.0/RXD - General-purpose I/O pin/UART receive data
  33. P3.1/TXD - General-purpose I/O pin/UART transmit data
  34. P3.2/INT0 - General-purpose I/O pin/External interrupt 0
  35. P3.3/INT1 - General-purpose I/O pin/External interrupt 1
  36. P3.4/T0 - General-purpose I/O pin/Timer 0 external input
  37. P3.5/T1 - General-purpose I/O pin/Timer 1 external input
  38. P3.6/WR - General-purpose I/O pin/Write control for external memory
  39. P3.7/RD - General-purpose I/O pin/Read control for external memory
  40. GND - Ground

Functional Features

  • High-performance 8-bit microcontroller suitable for various applications
  • Low-power consumption for energy-efficient designs
  • Versatile I/O capabilities for interfacing with external devices
  • Multiple communication interfaces (UART, SPI, I2C) for seamless connectivity
  • On-chip memory (program memory, RAM, data EEPROM) for storing and processing data
  • Timers/counters for precise timing and event counting
  • Reset and interrupt functionality for system control and responsiveness

Advantages and Disadvantages

Advantages: - High-performance architecture enables efficient execution of tasks - Low-power consumption extends battery life in portable applications - Versatile I/O pins allow for flexible interfacing with peripherals - Ample on-chip memory simplifies data storage and processing - Multiple communication interfaces enhance connectivity options

Disadvantages: - Limited program memory size may restrict the complexity of applications - Relatively small RAM size may limit the amount of data that can be stored - PLCC package may require additional care during soldering and handling

Working Principles

The W77E532A40

10個與W77E532A40PL在技術方案中應用相關的常見問題與解答

Sure! Here are 10 common questions and answers related to the application of W77E532A40PL in technical solutions:

  1. Q: What is the W77E532A40PL microcontroller used for? A: The W77E532A40PL is a microcontroller commonly used in embedded systems for various applications, including industrial automation, consumer electronics, and automotive systems.

  2. Q: What is the maximum clock frequency supported by the W77E532A40PL? A: The W77E532A40PL supports a maximum clock frequency of 40 MHz.

  3. Q: How much program memory does the W77E532A40PL have? A: The W77E532A40PL has 32 KB of program memory (Flash).

  4. Q: Can I expand the program memory of the W77E532A40PL? A: No, the program memory of the W77E532A40PL is fixed and cannot be expanded externally.

  5. Q: How many I/O pins does the W77E532A40PL have? A: The W77E532A40PL has a total of 32 I/O pins.

  6. Q: Does the W77E532A40PL support analog inputs? A: No, the W77E532A40PL does not have built-in analog-to-digital converters (ADCs), so it does not directly support analog inputs. However, external ADCs can be used if required.

  7. Q: What communication interfaces are supported by the W77E532A40PL? A: The W77E532A40PL supports multiple communication interfaces, including UART (Universal Asynchronous Receiver-Transmitter), SPI (Serial Peripheral Interface), and I2C (Inter-Integrated Circuit).

  8. Q: Can the W77E532A40PL be programmed in C/C++? A: Yes, the W77E532A40PL can be programmed using C/C++ programming languages. It also supports assembly language programming.

  9. Q: What voltage levels does the W77E532A40PL operate at? A: The W77E532A40PL operates at a voltage range of 2.7V to 5.5V.

  10. Q: Is the W77E532A40PL suitable for low-power applications? A: Yes, the W77E532A40PL has power-saving features and can be used in low-power applications by utilizing sleep modes and other power management techniques.

Please note that these answers are general and may vary depending on the specific implementation and requirements of your technical solution.