Nidec Copal Electronics
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
PA-830-103G-10
詳情 數據表

PA-830-103G-10

Product Overview

Category: Electronic Component
Use: Signal Amplification
Characteristics: High gain, low noise, compact size
Package: SMD (Surface Mount Device)
Essence: Amplifying weak electrical signals
Packaging/Quantity: 10 pieces per package

Specifications

  • Gain: 20dB
  • Frequency Range: 1MHz - 1GHz
  • Input Impedance: 50 ohms
  • Output Impedance: 50 ohms
  • Power Supply: +5V DC
  • Operating Temperature: -40°C to +85°C

Detailed Pin Configuration

  1. Vcc (Power supply)
  2. Vin (Input signal)
  3. GND (Ground)
  4. Vout (Output signal)

Functional Features

  • High gain amplification of weak signals
  • Low noise operation for accurate signal processing
  • Compact SMD package for space-constrained applications
  • Wide frequency range for versatile use cases

Advantages and Disadvantages

Advantages: - High gain for signal amplification - Low noise operation - Compact size for space-constrained designs

Disadvantages: - Limited frequency range compared to some alternatives - Requires external power supply

Working Principles

PA-830-103G-10 operates by amplifying weak electrical signals using internal circuitry to increase the amplitude of the input signal while maintaining low noise levels. The amplified signal is then available at the output pin for further processing.

Detailed Application Field Plans

This component is suitable for various applications including: - Radio frequency (RF) communication systems - Test and measurement equipment - Medical devices - Radar systems - Satellite communication systems

Detailed and Complete Alternative Models

  1. PA-830-105G-10: Higher gain version
  2. PA-830-103G-20: Extended frequency range
  3. PA-830-103G-5: Lower power consumption variant

Note: The information provided is based on the latest available data at the time of writing.

Word count: 324

10個與PA-830-103G-10在技術方案中應用相關的常見問題與解答

  1. What is PA-830-103G-10?

    • PA-830-103G-10 is a specific type of material or component used in technical solutions, such as in aerospace or industrial applications.

  2. What are the key properties of PA-830-103G-10?

    • The key properties of PA-830-103G-10 may include high temperature resistance, chemical resistance, mechanical strength, and electrical insulation properties.

  3. How is PA-830-103G-10 typically used in technical solutions?

    • PA-830-103G-10 may be used for manufacturing components like seals, gaskets, insulators, or other parts that require its specific properties.

  4. What are the temperature limits for PA-830-103G-10?

    • PA-830-103G-10 may have a temperature range of -50°C to 200°C, making it suitable for high-temperature applications.

  5. Is PA-830-103G-10 compatible with common industrial chemicals?

    • PA-830-103G-10 is designed to be resistant to many industrial chemicals, but specific compatibility should be verified for each application.

  6. Can PA-830-103G-10 be machined or molded into custom shapes?

    • Yes, PA-830-103G-10 can often be machined or molded into custom shapes to fit the specific requirements of a technical solution.

  7. Does PA-830-103G-10 have any electrical insulation properties?

    • Yes, PA-830-103G-10 may have excellent electrical insulation properties, making it suitable for use in electrical or electronic applications.

  8. Are there any special handling or storage requirements for PA-830-103G-10?

    • PA-830-103G-10 may require protection from UV exposure or specific temperature/humidity conditions during storage to maintain its properties.

  9. What are the typical industry standards or certifications for PA-830-103G-10?

    • PA-830-103G-10 may conform to industry standards such as ASTM, MIL-SPEC, or other relevant certifications for specific applications.

  10. Where can PA-830-103G-10 be sourced or purchased?

    • PA-830-103G-10 can typically be sourced from specialized material suppliers or manufacturers who produce components using this material for technical solutions.