Nexperia USA Inc.
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
PDTA114YU,115
詳情 數據表

PDTA114YU,115

Product Overview

  • Belongs to: Transistor
  • Category: Small Signal Transistors
  • Use: Amplification and Switching
  • Characteristics: High voltage capability, low collector-emitter saturation voltage
  • Package: SOT416 (SC-75)
  • Essence: NPN Resistor-Equipped Transistor (RET)
  • Packaging/Quantity: Tape and Reel, 3000 units per reel

Specifications

  • Voltage - Collector Emitter Breakdown (Max): 50V
  • Current - Collector (Ic) (Max): 100mA
  • Power - Max: 200mW
  • DC Current Gain (hFE) (Min) @ Ic, Vce: 100 @ 2mA, 5V
  • Transition Frequency: 250MHz

Detailed Pin Configuration

  1. Base
  2. Emitter
  3. Collector

Functional Features

  • High voltage capability
  • Low collector-emitter saturation voltage
  • Built-in resistor for simplified circuit design

Advantages

  • Small package size
  • Simplified circuit design due to built-in resistor
  • High voltage capability

Disadvantages

  • Limited current and power handling capabilities
  • Moderate transition frequency

Working Principles

PDTA114YU,115 is a small signal NPN transistor designed for amplification and switching applications. It operates by controlling the flow of current between the collector and emitter terminals based on the voltage applied to the base terminal.

Detailed Application Field Plans

This transistor is commonly used in audio amplifiers, signal processing circuits, and general purpose switching applications due to its high voltage capability and compact package size.

Detailed and Complete Alternative Models

  • BC847B,215
  • MMBT3904,215
  • 2N7002E,115

Word count: 274

10個與PDTA114YU,115在技術方案中應用相關的常見問題與解答

  1. What is PDTA114YU,115?

    • PDTA114YU,115 is a high-performance NPN bipolar junction transistor (BJT) designed for use in general-purpose amplifier and switching applications.

  2. What are the key features of PDTA114YU,115?

    • The key features include high current gain, low saturation voltage, and high transition frequency, making it suitable for various technical solutions.

  3. In what types of technical solutions can PDTA114YU,115 be used?

    • PDTA114YU,115 can be used in audio amplifiers, signal processing circuits, sensor interfaces, and other general-purpose electronic applications.

  4. What is the maximum collector current rating of PDTA114YU,115?

    • The maximum collector current rating is typically 100mA, making it suitable for low to moderate power applications.

  5. What is the typical voltage rating for PDTA114YU,115?

    • The typical voltage rating is around 50V, allowing for use in a wide range of low-voltage applications.

  6. Is PDTA114YU,115 suitable for high-frequency applications?

    • Yes, PDTA114YU,115 has a high transition frequency, making it suitable for high-frequency amplifier and switching circuits.

  7. What are the recommended operating conditions for PDTA114YU,115?

    • The recommended operating conditions include a maximum collector current of 100mA, a maximum collector-emitter voltage of 50V, and an operating temperature range of -55°C to 150°C.

  8. Can PDTA114YU,115 be used in automotive electronics?

    • Yes, PDTA114YU,115's robust design and performance characteristics make it suitable for use in automotive electronic systems.

  9. Are there any specific layout considerations when using PDTA114YU,115 in a circuit?

    • It is recommended to minimize lead lengths and keep input and output traces short to optimize performance and reduce parasitic effects.

  10. Where can I find detailed application notes and reference designs for using PDTA114YU,115 in technical solutions?

    • Detailed application notes and reference designs can be found in the product datasheet, as well as on the manufacturer's website and technical forums dedicated to electronic component applications.