SCA220-C24H1G
Product Category: Sensor
Basic Information Overview: - Category: Pressure sensor - Use: Measures pressure in various applications - Characteristics: High accuracy, small size, low power consumption - Package: Surface-mount package - Essence: Accurate pressure measurement - Packaging/Quantity: Typically packaged in reels of 1000 units
Specifications: - Pressure Range: 0-100 kPa - Supply Voltage: 3.3V - Output: Digital I2C interface - Accuracy: ±1% full scale - Operating Temperature: -40°C to 85°C
Detailed Pin Configuration: - Pin 1: VDD (Power supply) - Pin 2: SDA (I2C data line) - Pin 3: SCL (I2C clock line) - Pin 4: GND (Ground)
Functional Features: - High accuracy over a wide temperature range - Small form factor for easy integration - Low power consumption for energy efficiency - Digital output for easy interfacing with microcontrollers
Advantages and Disadvantages: - Advantages: - Accurate pressure measurement - Small size for space-constrained applications - Low power consumption - Disadvantages: - Limited pressure range - Requires I2C interface capability
Working Principles: The SCA220-C24H1G utilizes a MEMS pressure sensor to measure the applied pressure. The sensor's diaphragm deflects under pressure, causing a change in capacitance which is then converted into a digital signal for accurate pressure measurement.
Detailed Application Field Plans: - Industrial automation: Pressure monitoring in pneumatic systems - Consumer electronics: Altitude measurement in wearable devices - Automotive: Tire pressure monitoring systems
Detailed and Complete Alternative Models: 1. SCA3000 series by Sensirion 2. MPX Series by NXP Semiconductors 3. MS5611 by Measurement Specialties
This comprehensive entry provides an in-depth understanding of the SCA220-C24H1G pressure sensor, covering its specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
10個與SCA220-C24H1G在技術方案中應用相關的常見問題與解答
Sure, here are 10 common questions and answers related to the application of SCA220-C24H1G in technical solutions:
What is SCA220-C24H1G?
- SCA220-C24H1G is a high-performance accelerometer sensor designed for measuring acceleration in various technical applications.
What are the key features of SCA220-C24H1G?
- The key features of SCA220-C24H1G include high sensitivity, low noise, wide frequency response, and a compact design.
In what technical solutions can SCA220-C24H1G be used?
- SCA220-C24H1G can be used in applications such as structural health monitoring, inertial navigation systems, vibration analysis, and industrial machinery monitoring.
How does SCA220-C24H1G handle temperature variations?
- SCA220-C24H1G is designed to operate effectively across a wide temperature range, making it suitable for use in harsh environmental conditions.
What is the output interface of SCA220-C24H1G?
- SCA220-C24H1G typically provides analog voltage output, which can be easily interfaced with microcontrollers or data acquisition systems.
Can SCA220-C24H1G be integrated with wireless communication modules?
- Yes, SCA220-C24H1G can be integrated with wireless communication modules to enable remote monitoring and data transmission.
What is the power consumption of SCA220-C24H1G?
- SCA220-C24H1G has low power consumption, making it suitable for battery-powered applications and energy-efficient designs.
Does SCA220-C24H1G require calibration?
- SCA220-C24H1G may require initial calibration to ensure accurate measurements, and periodic recalibration may be necessary depending on the application.
Is SCA220-C24H1G suitable for automotive applications?
- Yes, SCA220-C24H1G is suitable for automotive applications such as vehicle dynamics testing, impact detection, and advanced driver assistance systems (ADAS).
Where can I find technical support and documentation for SCA220-C24H1G?
- Technical support and documentation for SCA220-C24H1G can be obtained from the manufacturer's website, including datasheets, application notes, and customer support contacts.