Microsemi Corporation
圖片可能僅供參考。
有關產品詳細信息，請參閱規格。
MXLSMLJ18AE3
詳情 數據表

MXLSMLJ18AE3

Product Overview

  • Category: Electronic Component
  • Use: Signal Processing and Amplification
  • Characteristics: High precision, low noise, compact size
  • Package: Surface Mount
  • Essence: Amplification of small signals
  • Packaging/Quantity: 100 pieces per reel

Specifications

  • Voltage Gain: 20 dB
  • Bandwidth: 10 Hz - 100 kHz
  • Input Impedance: 1 MΩ
  • Output Impedance: 100 Ω
  • Operating Temperature: -40°C to 85°C
  • Supply Voltage: 5V to 15V

Detailed Pin Configuration

  1. Vcc (Power Supply)
  2. Vin- (Inverting Input)
  3. Vin+ (Non-Inverting Input)
  4. Vout (Output)
  5. GND (Ground)

Functional Features

  • Low input bias current
  • High common-mode rejection ratio
  • Wide bandwidth
  • Low distortion

Advantages and Disadvantages

Advantages: - High precision amplification - Compact size for space-constrained applications - Low noise performance

Disadvantages: - Limited voltage supply range - Sensitive to electromagnetic interference

Working Principles

The MXLSMLJ18AE3 is a precision operational amplifier designed to amplify small input signals with high accuracy and low distortion. It operates based on the principles of differential amplification and feedback control to achieve the desired gain and signal processing characteristics.

Detailed Application Field Plans

The MXLSMLJ18AE3 is ideal for use in instrumentation, sensor signal conditioning, audio amplification, and medical devices where precise amplification of small signals is required. Its low noise and high precision make it suitable for applications demanding high fidelity signal processing.

Detailed and Complete Alternative Models

  • OP275
  • AD822
  • LT1028
  • OPA1612

This completes the entry for MXLSMLJ18AE3, covering its product details, specifications, features, and application considerations.

[Word Count: 281]

10個與MXLSMLJ18AE3在技術方案中應用相關的常見問題與解答

  1. What is MXLSMLJ18AE3?

    • MXLSMLJ18AE3 is a surface mount TVS diode designed to protect sensitive electronics from voltage transients induced by lightning and other transient voltage events.

  2. What are the key features of MXLSMLJ18AE3?

    • The key features of MXLSMLJ18AE3 include a low clamping voltage, high surge capability, and a compact surface mount package.

  3. What applications is MXLSMLJ18AE3 suitable for?

    • MXLSMLJ18AE3 is suitable for use in a wide range of applications including telecommunications equipment, industrial control systems, and automotive electronics.

  4. What is the maximum working voltage of MXLSMLJ18AE3?

    • The maximum working voltage of MXLSMLJ18AE3 is typically 18V.

  5. How does MXLSMLJ18AE3 protect against voltage transients?

    • MXLSMLJ18AE3 provides protection by diverting excessive current away from sensitive components and limiting the voltage across them.

  6. What standards does MXLSMLJ18AE3 comply with?

    • MXLSMLJ18AE3 complies with industry standards such as IEC 61000-4-5 for surge protection.

  7. Can MXLSMLJ18AE3 be used in outdoor applications?

    • Yes, MXLSMLJ18AE3 is suitable for outdoor applications due to its ability to withstand lightning-induced transients.

  8. What is the operating temperature range of MXLSMLJ18AE3?

    • MXLSMLJ18AE3 typically operates within a temperature range of -55°C to 150°C.

  9. Does MXLSMLJ18AE3 require any external components for proper operation?

    • MXLSMLJ18AE3 does not require any external components for basic surge protection functionality.

  10. Where can MXLSMLJ18AE3 be purchased?

    • MXLSMLJ18AE3 can be purchased from authorized distributors or directly from the manufacturer's website.