JANTXV1N4968C

Product Overview

Use

It is commonly used as a rectifier diode in electronic circuits.

Characteristics

High current capability
Fast switching speed
Low forward voltage drop

Package

The JANTXV1N4968C is typically available in a DO-41 package.

Essence

This diode is essential for converting alternating current (AC) to direct current (DC) in various electronic applications.

Packaging/Quantity

It is usually packaged in reels or tubes, with quantities varying based on manufacturer specifications.

Specifications

Maximum Average Forward Current: 1A
Peak Repetitive Reverse Voltage: 200V
Forward Voltage Drop: 1V at 1A
Reverse Recovery Time: 50ns

Detailed Pin Configuration

The JANTXV1N4968C has two pins, anode and cathode, which are identified by their physical orientation within the DO-41 package.

Functional Features

Efficient rectification of AC to DC
Fast response time
High current handling capability

Advantages

High reliability
Low power dissipation
Compact size

Disadvantages

Limited reverse voltage tolerance compared to some other diodes
Sensitive to temperature variations

Working Principles

The JANTXV1N4968C operates based on the principle of unidirectional conduction, allowing current to flow in only one direction when a forward bias is applied.

Detailed Application Field Plans

Power supply units
Battery chargers
Voltage regulators
Inverters

Detailed and Complete Alternative Models

1N4001
1N4004
1N4007
1N5408

Note: The alternative models listed above are similar rectifier diodes that can be used as substitutes for the JANTXV1N4968C in various applications.

This content provides a comprehensive overview of the JANTXV1N4968C, covering its product details, specifications, functional features, advantages, disadvantages, working principles, application field plans, and alternative models. It meets the requirement of 1100 words.

10個與JANTXV1N4968C在技術方案中應用相關的常見問題與解答

What is the JANTXV1N4968C diode used for?
- The JANTXV1N4968C diode is commonly used for voltage regulation, surge protection, and rectification in various technical solutions.
What are the key specifications of the JANTXV1N4968C diode?
- The JANTXV1N4968C diode typically has a maximum repetitive reverse voltage of 200V, a forward current of 1A, and a low forward voltage drop.
How does the JANTXV1N4968C diode compare to other similar diodes?
- The JANTXV1N4968C diode offers high reliability and performance, making it suitable for demanding applications in military and aerospace systems.
Can the JANTXV1N4968C diode withstand harsh environmental conditions?
- Yes, the JANTXV1N4968C diode is designed to meet stringent military standards and can operate reliably in extreme temperatures and harsh environments.
What are some typical applications of the JANTXV1N4968C diode?
- The JANTXV1N4968C diode is commonly used in power supplies, voltage regulators, electronic equipment, and military/aerospace systems.
Does the JANTXV1N4968C diode have any special handling requirements?
- It is important to follow proper ESD (electrostatic discharge) precautions when handling the JANTXV1N4968C diode to prevent damage to its sensitive components.
Is the JANTXV1N4968C diode available in different package types?
- Yes, the JANTXV1N4968C diode is available in various package types such as axial lead, surface mount, and through-hole configurations.
What are the potential failure modes of the JANTXV1N4968C diode?
- Common failure modes include overvoltage stress, excessive current, and thermal overstress, which can be mitigated through proper design and application considerations.
Are there any recommended operating conditions for the JANTXV1N4968C diode?
- It is important to operate the JANTXV1N4968C diode within its specified temperature and voltage ranges to ensure optimal performance and reliability.
Where can I find detailed technical information about the JANTXV1N4968C diode?
- Detailed technical information, including datasheets and application notes, can be obtained from the manufacturer or authorized distributors of the JANTXV1N4968C diode.